1. ZT310-X rear mudguard bracket (dark gray matte)
|
|
|
|
|
|
|
|
2. Non-standard bolt M8×25 (color Zinc)
|
|
|
|
|
|
|
|
3. Flanging bushing φ8.2×φ11×4.5＋φ16×1.5(environmental color)
|
|
|
|
|
|
|
|
4. Flanging bushing rubber (φ11×φ16×1)
|
|
|
|
|
|
|
|
5. ZT310-X Back mudboard support cover plate
|
|
|
|
|
|
|
|
6. Buffer rubber of flanging bushing (φ8.5×φ14×1)
|
|
|
|
|
|
|
|
7. Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5
|
|
|
|
|
|
|
|
8. ZT310 rear turn signal (including license plate light)
|
|
|
|
|
|
|
|
9. GB96.1 φ6(environmental color)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: the vehiclea produced after 2018-10-01 can purchase this after sale part(as shown ②), the vehicles produced before 2018-10-01 can purchase this part(as shown ①) with 1224200-120000 rear turning signal bracket of ZT310 .If you have any questions,please contact your sales.
|
|
|
|
11. ZT250-S rear reflector
|
|
|
|
|
|
|
|
12. ZT250-S rear liceness rubber buffer
|
|
|
|
|
|
|
|
13. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
14. Rear advertising plate (ZONTES)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 2 pieces of non-standard bolts M6×12 (304 stainless steel) or Non standard internal plum blossom bolt M6×12 (304 stainless steel) and 2 pieces of GB6177.1M6 (environmental color) are required.
|
|
|
|
15. HJ125-6 rear license light bracket
|
|
|
|
|
|
|
|
16. GB6177.1M6 (environmental color)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:10# sleeve.
|
|
|
|
17. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
18. ZT310-R adapter cable of rear turning light(L=600)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X which was produced before March 1, 2018, will need to be purchased with the adapter cable when replacing individually the left and right turn signals or license plate lights. The It is not required to purchased when ZT310-R be produced after March 1,2018; the ZT310-X of turn signal is assembled on the rear fender and can be purchased individually purchase to replace the patch cord. If you have any questions, please contact your sales. If you do not purchase, you can change the line yourself, but make sure the wiring is firm and reliable.
|
|
|
|
19. ZT310 rear turn signal bracket
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Vehicles manufactured after April 1, 2018 can purchase this material directly. Vehicles manufactured before April 1, 2018 are of old structure, so it is necessary to purchase flanging Bush buffer rubber + flanging Bush + non-standard bolt M6 together × 12 + two splints. If it is used for the upper mudguard (i.e. the rear license plate is on it, not on the auxiliary mudguard), the boss on the rear mudguard shall be cut off by itself, or the quality feedback sheet shall be written for guidance by the engineer.
|
|
|
|
20. ZT310-X Rear left turning light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). If you have any questions, please contactyour sales.
|
|
|
|
21. ZT310-X Rear right turning light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). If you have any questions, please contactyour sales.
|
|
|
|
22. ZT310-X Liensed lights
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). Does not contain screws，you can purchase "1251200-057093 Non-standard cross self-tapping screw ST3.0×7 (color zinc)".
|
|
|
|
23. Non-standard cross self-tapping screw ST3.0×7 (color zinc)
|
|
|
|
|
|
|
|
24. Non-standard cross self-tapping screw ST3.8×10 (military green)
|
|
|
|
|
|
|
|
25. ZT310-X rear right turn signal fixing bracket
|
|
|
|
|
|
|
|
26. ZT310-X rear left turn signal fixing bracket
|
|
|
|
|
|
|
|
27. ZT310 rear turn signal fixing wire clip
|
|
|
|
|
|
|
|
28. Hexagon socket head screw M6×16+8.5×5 SUS302
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:This bolt can be used to replace the structure of "M6×16 Bolt + GB 96.1 φ 6 + flanging bushing buffer glue + muffler anti-ironing plate bushing". Such as U rear fender / X rear fender and rear fender steering bracket in front of the installation point.
|
|
|
|