1. ZT310-R steering bearings aftermarket assembly
|
|
|
|
|
|
|
|
2. ZT250-S lower connection borad(self made/with ball head) assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 1 piece of 1130900-024000 ZT250-S shaft ring and 1 piece of 1224100-006000 ZT250-S direction column dust cover are included. If the front fork is slightly swayed when the brake is found or the direction is swung, check whether the front tire pressure is the recommended air pressure at room temperature: 240±10kPa, the standard is 250kPa. If it is lower than the recommended air pressure, first inflate the front tire air pressure to 340 kPa, then deflate to 240 ± 10 kPa, and test the vehicle to check whether it is released. If the front wheel is otherwise lifted and turned to check the tire tread, the front tire should be replaced if it is eccentric or deformed. If the above operation cannot be solved, check if the adjusting nut is loose.
|
|
|
|
3. ZT250-S Adjusting nut locking washer(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
4. ZT250-S Adjusting nut rubber gasket (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
5. ZT250-S direction column adjusting screw nut M24×1 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: The thread is M24 × 1.
|
|
|
|
6. ZT250-S steering stem dust cap (Up)
|
|
|
|
|
|
|
|
7. ZT350-R upper dust cover
|
|
|
|
|
|
|
|
8. ZT250-S shaft ring (after-sale)
|
|
|
|
|
|
|
|
9. ZT250-S conjoined steel ball (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
10. ZT250-S steering stem dust cap(down)
|
|
|
|
|
|
|
|
11. GB70.1 Hexagonal Socket M8×30 (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs.
|
|
|
|
12. ZT250-S upper steel bowl (after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Note that it must be pressed in place.
|
|
|
|