1. ZT310-T electric device box
|
|
|
|
|
|
|
|
2. ZT310-T electric component box cover
|
|
|
|
|
|
|
|
3. ZT310-T Rear cover after-sales assembly(lithium battery)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This kit is only applicable to lithium battery version motorcycle owners who replace the T-tail skirt with the purchase. Owners who replace the T1 tail skirt must also purchase this kit.
|
|
|
|
4. ZT350-T rear fairing (black)
|
|
|
|
|
|
|
|
5. ZT350-T rear fairing (dark gray)
|
|
|
|
|
|
|
|
6. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
7. HJ125-6 Battery rubber gasket
|
|
|
|
|
|
|
|
8. ZT310 PKE controller (single antenna)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This material is a single-antenna PKE controller with a white square interface. Click or download the image on the left to see a larger picture. This model is used with the 1184200-053000 ZT310PKE external single antenna.This status has been discontinued and is for quality feedback only. Our PKE has sealed the key learning port in consideration of vehicle safety and solidified the key code in the PKE chip, so the new key cannot be assigned after the key is lost. Customers are advised to evaluate whether the lost key affects the safety of the vehicle. If it does not affect it, it is recommended to use the spare key to continue the use, otherwise the replacement PKE should be replaced.
|
|
|
|
9. ZT310PKE external single antenna
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: If the original motorcycle is a new state single-antenna PKE controller, this material can be purchased separately. Click or download the image on the left to see a larger picture. If you need the velcro can purchase "1226400-188000 Velcro (External Single Antenna)" for after-sale.
|
|
|
|
10. ZT310 PKE Assembly (enlarge battery induction key)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The battery type of the sensor key is CR2032.
|
|
|
|
11. ZT310 PKE new version (band version )
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The old "ZT310 PKE Controller (Single Antenna)" for ZT250-R National IV and 310 series models can purchase this assmbly directly and the antenna uses the single antenna of the original car.If the original car is a "ZT310 PKE controller with dual antennas", it must be used with the purchase of "1184200-053000 ZT310PKE external single antenna".The battery type of the sensor key is Camelion CR1225.
|
|
|
|
12. ZT310 Induction Key (Bracelet Edition-enlarge battery)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:If you need to purchase the sensor key , please consult your salesman for details.
|
|
|
|
13. ZT310 Induction Key (Bracelet Edition)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: If you can not purchase this sensor key , please consult your salesman for more details.
|
|
|
|
14. ZT310 induction key rubber ring
|
|
|
|
|
|
|
|
15. 310PKE battery for key
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Battery model: CR2450.
|
|
|
|
16. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
17. ZT250-R Battery straps
|
|
|
|
|
|
|
|
18. ZT310 lithium battery(suspend production)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Production of this part was discontinued from April 26,2019. The original vehicle equipped with this battery can be replaced with "1184200-230000 ZT310 lithium battery (4Ah)" without wake-up switch, and the original vehicle wake-up switch must be removed.
|
|
|
|
19. ZT250 lithium battery
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: As the modified parts of ZT250-S and ZT250-S upgraded version, the lithium battery is slightly smaller than before, so it is necessary to find methods to fix the lithium battery to prevent the loosening of the outer casing for a long time. The voltage should be checked regularly, such as when it is below 12.8 volts. When you are not using the vehicle for a long time, you should remove the battery and charge it once a month. Pay attention to distinguish between positive and negative when installing. Be sure to charge with a dedicated lithium battery charger. Do not charge by bridging or directly connecting to the power supply. It is recommended to short press the start button twice in the winter for long-term outdoor parking. It should not be more than 2 seconds each time; then it should be normally ignited (the continuous button should not exceed 5 seconds). It takes more than 10 seconds to re-ignite. This battery has a capacity of 4.4AH.
|
|
|
|
20. ZT310 Colloidal Battery (MG5ZS/4Ah)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The warranty period is 3 months. This 4Ah gel battery can be used to replace the lithium battery, the batteries of the model YTZ7S-BS and YTZ7-BS; it can be directly charged with the charger of the original lithium battery version. In order to facilitate after-sales traceability, it is necessary to check the frame code and engine code. Before assembly, be sure to distinguish the positive and negative poles. The wrong connection will cause the electrical components of the whole vehicle to be burned, and it will lead to fire and burning. The capacity is small, so it is not recommended to install electrical devices such as spotlights and GPS. If you often drive a short distance and spend a lot of time riding at night, be sure to regularly charge the battery, so as not to affect the driving experience due to power feeding. Or buy other brands of batteries of the same size or model as the original discontinued sale by yourself.
|
|
|
|
21. ZT310 lithium battery (4Ah)
|
|
|
|
|
|
|
|
22. ZT310 Lithium battery wake up switch
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Cancelled from April 26, 2019. For the after sale replacement of original motorcycle with a wake-up switch. Use with "1184200-012000 ZT310 Lithium Battery".
|
|
|
|
|
|
|
|
|
|
|
|
|
24. ZT310 lithium battery charger
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Lithium battery charger. Some models produced before April 26, 2019 have their own charging adapters. Subsequent production vehicles will incorporate this patch cord into the main cable and will not be disassembled. If the vehicle is produced in the early stage, if you do not purchase the adapter cable, you can change the line yourself. When changing the line, be sure to take protective measures (such as short circuit, waterproof,etc.) and correctly distinguish the positive and negative poles. Charging time is strictly in accordance with the instructions, not overcharged, from the full exhaustion of electricity to about 70 minutes. It is not recommended to charge other brands of lithium batteries, such as the loss caused by charging other brands of batteries by the customer.
|
|
|
|
25. ZT250-S starting relay
|
|
|
|
|
|
|
|
26. MT05.2 engine controller-ZT310-RC4 (ECU)
|
|
|
|
|
|
|
|
27. ZT310-R relay of side support
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Model G8HN-1C4T-RJ.
|
|
|
|
28. ZT310 Electric parts box lower cover
|
|
|
|
|
|
|
|
29. ZT250-S fuel-injection relay
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Model KH-1A4T-R.
|
|
|
|
30. 6.3×12×1.6 copper gasket
|
|
|
|
|
|
|
|
31. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
32. ZT310PKE External antenna mount
|
|
|
|
|
|
|
|
33. ZT310 PKE key decorative part
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The PKE key housing can only be replaced separately and does not contain internal electrical components. Our PKE has considered the key learning port was sealed by the vehicle safety and solidified the key code in the PKE chip, so the new key cannot be assigned after the key is lost. Customers are advised to evaluate whether the lost key affects the safety of the vehicle. If it does not have affect, it is recommended to use the spare key to continue the use, otherwise the PKE should be replaced.
|
|
|
|
34. ZT310-X electric device box back glue
|
|
|
|
|
|
|
|
35. ZT310 battery clip to DC mother charging adapter
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Non-complete vehicle standard. It is convenient to take the battery home when charging, and it needs to be used together with "1184200-038044 ZT310 lithium battery charger".
|
|
|
|
36. ZT310 charging adapter cable
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Some models produced before April 26, 2019 have brought this adapter cable. The vehicles subsequent produced will incorporate this adapter cable into the main cable and will not be disassembled. If you do not purchase this adapter cable, you can change the cable yourself. When you change the cable, you must take protective measures (such as short circuit protection, waterproof, etc.) and correctly distinguish the positive and negative poles.
|
|
|
|
37. ZT310 univsersal fuse (10A small)
|
|
|
|
|
|
|
Quantity
|
|
|
8
|
|
Remarks: Small 10A.
|
|
|
|
38. ZT310 univsersal fuse (15A small)
|
|
|
|
|
|
|
Quantity
|
|
|
6
|
|
Remarks: Small 15A.
|
|
|
|
39. ZT310 univsersal fuse (25A small)
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks: Small 25A.
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Medium 25A.
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Medium 10A.
|
|
|
|
42. ZT250-S fuze wire (15A)
|
|
|
|
|
|
|
Quantity
|
|
|
8
|
|
Remarks: KST brand medium 15A fuse.
|
|
|
|
43. Battery for key (CR1225)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Please use original parts!Otherwise may cause damage to the ECU!Any loss caused by the using of non-original parts does not beling to the scope of guarantees.
|
|
|
|
45. Velcro (external single antenna )
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:The external PKE antenna of individual models is pasted on the cover, and it is recommended to purchase this part at the same time if you need to replace the cover.
|
|
|
|
46. Bracelet key battery cover
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Only battery cover ,no other accessories. Only for small battery version of induction key.
|
|
|
|
47. Bracelet key battery cover (enlarge battery)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Only battery cover ,no other accessories. Only for big battery version of induction key.
|
|
|
|
48. Button battery (Camelion CR2032)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Just for the enlarge battery version PKE Induction Key .
|
|
|
|