1. ZT350-T electrical device box
|
|
|
|
|
|
|
|
2. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
3. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
4. 6.3×12×1.6 copper gasket
|
|
|
|
|
|
|
|
5. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
6. ZT250-S starting relay
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Please use original parts!Otherwise may cause damage to the ECU!Any loss caused by the using of non-original parts does not beling to the scope of guarantees.
|
|
|
|
8. HJ125-6 Battery rubber gasket
|
|
|
|
|
|
|
|
9. ZT310-T upper cover,Gel battery box
|
|
|
|
|
|
|
|
10. ZT310 Electric parts box lower cover
|
|
|
|
|
|
|
|
11. ZT350-R charging port bracket
|
|
|
|
|
|
|
|
12. Non-standard cross tapping screws ST3.9×12 (Black Zinc)
|
|
|
|
|
|
|
|
13. ZT350 charging port holder
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15. ZT250-R dump switch sleeve
|
|
|
|
|
|
|
|
16. ZT310 colloid battery (6-FM-10/10Ah)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The outline is about 196 × 114 × 61mm; it is recommended to use “1184300-026000 ZT350 lead-acid battery charger” to charge,or use the lithium battery charger that comes with the lithium battery.The lithium battery version of the ZT310-R / X / T series can purchase modification kit for colloidal batteries in modified pieces.The voltage should be checked regularly, and it should be charged in time if it is below 12volts.When the motorcycles is not used for a long time, the battery should be removed for storage and recharged once a month.Pay attention to distinguish between positive and negative poles during installation.
|
|
|
|
17. ZT310 gel battery strap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19. ZT368 Battery Charger
|
|
|
|
|
|
|
|
20. Charger adapter cable
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: If it is a model with PKE, the alligator clip can be used to connect the charged battery, and the DC5.5 male plug connected by the adapter cable is powered on by PKE or the charging port holder, which is convenient for occasions where it is not convenient to connect to the 220V power supply. Models without PKE need to purchase an adapter cable to directly charge the battery with the charger. Models above 250CC (excluding 250CC) that have a complimentary charger with the vehicle are only free chargers and do not give charging adapters, and need to purchase them by themselves. Pay attention to distinguish between positive and negative plates, avoid reverse connection, red connected to the positive pole of the battery, black connected to the negative pole.
|
|
|
|
21. ZT310-R battery holder (gel battery)
|
|
|
|
|
|
|
|
22. Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5
|
|
|
|
|
|
|
|
23. Buffer rubber of flanging bushing (φ8.5×φ14×1)
|
|
|
|
|
|
|
|
24. GB6177.1M6 (environmental color)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:10# sleeve.
|
|
|
|