1. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
2. ZT368T-M Front Panel (Laser Yellow/black ZONTES Decal/Black Foam)
|
|
|
|
|
|
|
|
3. ZT250-S Side cover round rubber
|
|
|
|
|
|
|
|
4. Non-standard cross tapping screws ST3.9×12 (Black Zinc)
|
|
|
|
|
|
|
|
5. ZT150T-M front left panel (Laser yellow/black/iron armor M flower)
|
|
|
|
|
|
|
|
6. Hexagon socket head screw M6×14+8.5×3 SUS302
|
|
|
|
|
|
|
Quantity
|
|
|
12
|
|
Remarks:It can be used as an alternative to "1251100-120093 Non-standard bolts M6×16 (environmental color)"+"1274100-057095 Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5"+"1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) " or "1251100-102000 Non-standard bolt M6×16 (304 stainless steel)"+"1274100-057095 Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5"+"1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) " or "1251100-102000 Non-standard bolt M6×16 (304 stainless steel）"+"1244100-037000 φ12×φ8.5×2.5 circle buffer glue"+"1274100-018000 ZT250-S muffler anti-hot plate sleeve" fixing structres.
|
|
|
|
7. ZT150T-M front right panel (Laser yellow/black/iron armor M flower)
|
|
|
|
|
|
|
|
8. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11. Black foam single side tape(wide1cm/length1m/thin2mm)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Each roll is 1 meter long and 1 cm wide. It is used to prevent noise from being generated by mutual friction between the cover members.
|
|
|
|
12. ZT310T-M front air outlet middle net
|
|
|
|
|
|
|
|
13. ZT310T-M Position Light (Brown Version)
|
|
|
|
|
|
|
|
14. ZT310T-M Left Daytime Running Light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remark：The early ZT310T-M had only one white plug for two wires, while the new model had a white plug and a bullet for three wires. If your vehicle for the old model the bullet wire no need connected, such as for the new model should be connected.
|
|
|
|
15. ZT310T-M Right Daytime Running Light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remark：The early ZT310T-M had only one white plug for two wires, while the new model had a white plug and a bullet for three wires. If your vehicle for the old model the bullet wire no need connected, such as for the new model should be connected.
|
|
|
|
16. ZT310T-M front vents (special black high-gloss/P-240 foam improvement)
|
|
|
|
|
|
|
|
17. P-240 foam improvement (width 6mm, length 1m, thickness 5mm)
|
|
|
|
|
|
|
|
18. ZT350T－M Front Head Cover Decal (Light Grey/ZONTES/Polymer/High Adhesion)
|
|
|
|
|
|
|
|
19. ZT150T-M front decal for cowl (BLACK/ZONTES/HIGH STICK)
|
|
|
|
|
|
|
|
20. ZT150T-M cowl left decal (Black/Ironclad Grey/M/High Stick)
|
|
|
|
|
|
|
|
21. ZT150T-M cowl right decal (Black/Ironclad Grey/M/High Sticky)
|
|
|
|
|
|
|
|