1. ZT1P77MP refined filter seal component (carton packaging)-B
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Suitable for 24-series 368 and 350 series scooter models, not applicable to ETC series models. To disassemble and assemble the fine filter, you need to purchase a 14-sided 65mm cap-type filter wrench + a 1/2" (12.5mm) ratchet wrench; the Sata model number of the filter wrench is 97401. Regularly check or replace according to the maintenance schedule in the user manual. The fine filter comes in two appearances, one with only English and the other with both Chinese and English, and both have the same quality, with random delivery. The code printed on the surface of the fine filter is 1050871-001000, and the outer contour dimensions are approximately φ65×65mm.
|
|
|
|
2. ZT350T-D engine air inlet sponge filter (carton packaging)
|
|
|
|
|
|
|
|
3. ZT368T-M Oxygen Sensor bracket
|
|
|
|
|
|
|
|
4. φ6 wire clamp (L=57)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
5. φ8 clip(L=73)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
6. ZT368T-D engine left air inlet sponge filter element assembly
|
|
|
|
|
|
|
|
7. Hexagonal small flange internal plum blossom bolt M6 × 16 (9.8/zinc nickel alloy/Ⅱ)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:T30 or 8# sleeve.
|
|
|
|
8. ZT350T-D engine cylinder head wire harness bracket
|
|
|
|
|
|
|
|
9. ZT368T-D Oil filter guard plate (black foam/outside association)
|
|
|
|
|
|
|
|
10. ZT368T-D lithium battery strap(after-sale)
|
|
|
|
|
|
|
|
11. Black foam single side tape(wide1cm/length1m/thin2mm)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Each roll is 1 meter long and 1 cm wide. It is used to prevent noise from being generated by mutual friction between the cover members.
|
|
|
|
12. ZT300T-M Inlet filter element sealing ring (φ 4×540)
|
|
|
|
|
|
|
|