|
|
|
|
Quantity
|
|
|
1
|
|
Note: This assembly requires special equipment for dynamic balance after disassembly, so self-disassembly is not recommended. During installation, the tightening torque of the M36×1.0 thin nut on the driven wheel is 90±10N. m. A 46# socket is required to remove the nut on the driven wheel shoe assembly. Molybdenum-based grease is recommended. Since the grease has been pre-filled before delivery, small packages of grease cannot be provided. For self-maintenance, genuine products can be purchased through other channels.
|
|