1. ZT310-R press block of handle bar(home-made)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Assembly direction must tighten the front 2 bolts before tightening the rear bolts.
|
|
|
|
2. ZT250-S M8 bolt decorative buckle (titanium gold/WX)
|
|
|
|
|
|
|
|
3. GB70.1 Hexagonal Socket M8×30 (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs.
|
|
|
|
4. ZT310-X direction to put the block assembly
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Contains 1251111-006000 ZT310-R studs. The direction bar pad block and the stud bolt are assembled together with a special double-head stud sleeve portion, and the thread fastening rubber is applied to strengthen the fastening function of the stud bolt, and it is difficult to remove and tighten the double head bolts after the subsequent replacement is required. It is recommended to replace the whole set. If only the studs are replaced, the assembly must be in place and sturdy. We will not be responsible for any damage caused by improper assembly.Due to the change of state,this section is suspended,you can buy"4094200-009000 ZT310-X direction pad M10×1.25(titanium/spray paint)after-sales assembly ”instead,it's recommended to buy 2 pcs at the same time.
|
|
|
|
5. ZT310-R double head screw(after-sale)
|
|
|
|
|
|
|
|
6. ZT310-X direction pad M10×1.25(titanium/spray paint)after-sales assembly
|
|
|
|
|
|
|
|
7. ZT310-R gasket of upper connecting board(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
8. ZT310-R bushing φ10×φ12×41(after-sale)
|
|
|
|
|
|
|
|
9. ZT310-R buffer rubber of upper connecting board
|
|
|
|
|
|
|
|
10. Non-standard nut M10×1.5(Dacromet)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:14# sleeve.
|
|
|
|