1. ZT350T-M lower connection Board (self-made with bead top)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 1 piece of “1246200-044000 ZT350T-M Dustproof glue under the direction post”and“1136200-002000 ZT310T－M lower shaft ring”are included. If the front fork is slightly swayed when the brake is found or the direction is swung, check whether the front tire pressure is the recommended air pressure at room temperature: 260kPa. If it is lower than the recommended air pressure, first inflate the front tire air pressure to 300 kPa, then deflate to 260kPa, and test the vehicle to check whether it is released. If the front wheel is otherwise lifted and turned to check the tire tread, the front tire should be replaced if it is eccentric or deformed. If the above operation cannot be solved, check if the adjusting nut is loose.
|
|
|
|
2. GB/T1099.1 key 5×5.2×19
|
|
|
|
|
|
|
|
3. ZT350T-M dustproof glue under the direction post
|
|
|
|
|
|
|
|
4. ZT310T-M lower shaft ring
|
|
|
|
|
|
|
|
5. Non-standard bolt M10×1.5×43(Dacromet)
|
|
|
|
|
|
|
|
6. ZT250-S upper steel bowl (after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Note that it must be pressed in place.
|
|
|
|
7. ZT250-S conjoined steel ball (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small, for the convenience of packing and shipping, it is required that this part be sold in packs/bags/boxes of 5 pieces. The assembly quantity in the assembly indicates the actual usage of this part in the current assembly (the assembly quantity is not multiplied by 5), so please be sure to pay attention to the quantity (this quantity is multiplied by 5) when placing an order to avoid over-purchasing.
|
|
|
|
8. ZT250-S shaft ring (after-sale)
|
|
|
|
|
|
|
|
9. ZT350-R upper dust cover
|
|
|
|
|
|
|
|
10. ZT250-S direction column adjusting screw nut M24×1 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks: The thread is M24 × 1.
|
|
|
|
11. ZT250-S Adjusting nut locking washer(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
12. ZT250-S Adjusting nut rubber gasket (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
13. ZT310T-M lower seat ring
|
|
|
|
|
|
|
|
14. ZT310T-M steering bearings aftermarket assembly
|
|
|
|
|
|
|
|