1. ZT180MN Crankshaft connecting rod assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Includes left and right axle diameter bearings. This condition only applies to models produced after 9 April 2018, for models produced before this date, if you need a replacement crankshaft, please contact our sales staff.
|
|
|
|
2. ZT180MN crankshaft right bearing limit retaining ring
|
|
|
|
|
|
|
|
3. 5×5.5×26×9 woodruff key(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
4. ZT180MN counterweight timing drive sprocket A
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: With 9 timing chains.
|
|
|
|
5. ZT180MN Counterweight timing drive chain wheel
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: With 7 timing chains.
|
|
|
|
6. 5×5.5×19.2 general flat key
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8. Lock washer, 18.2×30×2.5×2
|
|
|
|
|
|
|
|
9. GB6172.1M18×1 hexagonal thin nut (10 grade/black oxide)
|
|
|
|
|
|
|
|
10. 4×4.6×25×14 woodruff key
|
|
|
|
|
|
|
|
11. ZT180MN Balance shaft assembly A
|
|
|
|
|
|
|
|
12. F809020 cylindrical roller bearing(FAG)
|
|
|
|
|
|
|
|
13. F809020 cylindrical roller bearing (Seft-made)
|
|
|
|
|
|
|
|