1. ZT703-F Left Fuel Tank Decoration Cover Fixed Bracket
|
|
|
|
|
|
|
|
2. ZT703-F Right Fuel Tank Decoration Cover Fixed Bracket
|
|
|
|
|
|
|
|
3. ZT703-F Cushion Assembly Kit(II.)
|
|
|
|
|
|
|
|
4. GB818M4×6 (white Zinc)
|
|
|
|
|
|
|
|
5. Plywood M6×11×15(zinc-nickel)
|
|
|
|
|
|
|
|
6. Inner plum blossom shaft shoulder screw M6×14+ φ8.5×2.9 (304 stainless steel)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:T25 Torx wrench.
|
|
|
|
7. GB96 washer φ4×φ12×1 (304 stainless steel)
|
|
|
|
|
|
|
|
8. Non standard internal plum blossom bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
9. ZT703-F Fuel Tank Decorative Cover Fixing Bracket Hook
|
|
|
|
|
|
|
|
10. ZT703-F left baffle panel (pearl white)
|
|
|
|
|
|
|
|
11. ZT703-F right bracketing panel (pearl white)
|
|
|
|
|
|
|
|
12. ZT703－F Fuel Tank Left Decorative Cover
|
|
|
|
|
|
|
|
13. ZT703－F Fuel Tank Right Decorative Cover
|
|
|
|
|
|
|
|
14. Expansion Buckle(KJ-53)
|
|
|
|
|
|
|
|
15. ZT703-F left surround cover lower part of the decal (bright red/cold gray/L3/polymer/high viscosity)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This decal is an inner sticker (that is, the decal is pasted first and then covered with varnish), due to process reasons, the decal can not be purchased separately to achieve the original decal effect, so the decal is not sold separately only for quality feedback.
|
|
|
|
16. ZT703-F right bracket cover lower decal (bright red/cold gray/L3/polymer/high viscosity)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This decal is an inner sticker (that is, the decal is pasted first and then covered with varnish), due to process reasons, the decal can not be purchased separately to achieve the original decal effect, so the decal is not sold separately only for quality feedback.
|
|
|
|
17. ZT703-F Left Surround Cover Upper Decal (Bright Red / Cold Gray / ZONTES / Polymer / High Viscosity)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This decal is an inner sticker (that is, the decal is pasted first and then covered with varnish), due to process reasons, the decal can not be purchased separately to achieve the original decal effect, so the decal is not sold separately only for quality feedback.
|
|
|
|
18. ZT703-F right surround cover upper part decal (bright red / cool gray / ZONTES / polymer / high viscosity)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This decal is an inner sticker (that is, the decal is pasted first and then covered with varnish), due to process reasons, the decal can not be purchased separately to achieve the original decal effect, so the decal is not sold separately only for quality feedback.
|
|
|
|
19. Black foam single side tape(wide1cm/length1m/thin2mm)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Each roll is 1 meter long and 1 cm wide. It is used to prevent noise from being generated by mutual friction between the cover members.
|
|
|
|