1. ZT184MP Right crankcase cover subassembly (dark gray)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Does not include torsion spring and rocker arm. The part assembly contains bearings or oil seals. The specific links are as follows: www.zontes.com＞Mine＞More function＞The download section。
|
|
|
|
2. ZT180MN water pump cover A (dark gray)
|
|
|
|
|
|
|
|
3. ZT180MN fine filter cover A (dark gray)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5. 25×3.1 Hydrogenated nitrile rubber O-ring
|
|
|
|
|
|
|
|
6. Non-standard cover type 9 degree nut M6×13 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks:0# Sleeve. This is a new, taller nut. If you need to replace the stud, you must purchase this taller nut at the same time. This nut can replace the old, shorter nut, and for the sake of uniformity, it is recommended to replace them simultaneously. For water-cooled series models such as KD150-U/G1/Z2, the standard torque is 10N ± 1.5N.m; for series models such as ZT310, ZT350, ZT250-S/R, it is 12N ± 1.5N.m; for ZT310T-M, it is 10N ± 1N.m. Starting from February 19, 2025, the two nuts at the ECU installation location of ZT350-V1/VX/S will be switched to this model, and the original nuts will be phased out. It is recommended to purchase 2 pieces for replacement at the same time.
|
|
|
|
7. ZT180MN clutch rod shaft
|
|
|
|
|
|
|
|
8. GB896 opening retaining ring φ9
|
|
|
|
|
|
|
|
9. 10.2×18×1 gasket (zinc-nickel alloy)
|
|
|
|
|
|
|
|
10. ZT184MP fine filter sealing assembly(carton packaging)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Included refiner,ZT180MN oil refiner seal and 55×2.5 O-ring.
|
|
|
|
11. ZT180MN Oil filter sealing ring
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: When changing the oil filter element, please pay attention to check whether the seal ring is damaged. Be motorcycleeful not to leak the seal ring.
|
|
|
|
12. Φ16.4×17×1.6 filter spring
|
|
|
|
|
|
|
|
13. 55×2.5 Hydrogenated nitrile rubber O-ring
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: When updating the oil filter element, pay attention to check whether the O-ring is damaged or trimmed. If it is, it needs to be replaced.
|
|
|
|
14. ZT180MN Water pump sealing ring
|
|
|
|
|
|
|
|
15. φ8×14 hollow locating pin
|
|
|
|
|
|
|
|
16. M6×10 top pin bolt (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
|
17. GB16674 M6×30 Hexagon flange bolts (9.8 grade/environmental color Zinc)
|
|
|
|
|
|
|
|
18. Combination seal 6×13×1.8
|
|
|
|
|
|
|
|
19. 6.5×2 Hydrogenated nitrile rubber O-ring
|
|
|
|
|
|
|
|
20. φ7.3×φ15×1.6 copper gasket
|
|
|
|
|
|
|
|
21. M7×12.5 pivot bolt (zinc-nickel alloy)
|
|
|
|
|
|
|
|
22. ZT184MP pressure relief valve spring seat
|
|
|
|
|
|
|
|
23. ZT184MP pressure relief valve spring
|
|
|
|
|
|
|
|
24. ZT184MP pressure relief valve plunger
|
|
|
|
|
|
|
|
25. GB893.1 hole retaining ring φ15
|
|
|
|
|
|
|
|
26. φ3×φ5×23 copper overflow pipe joint
|
|
|
|
|
|
|
|
27. φ4×φ7×200 EPDM rubber tube
|
|
|
|
|
|
|
|