1. Zt350-gk Front Spoke Wheel (MT3.5×17/ Black)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: oil seal TC φ42×φ28×7; bearing size φ42×φ20×12；bearing model: 6004-2RS.
|
|
|
|
2. ZT368T-G Front Aluminum Wheel Middle Spacer (φ27×φ21×102)
|
|
|
|
|
|
|
|
3. 120/70ZR17 CM－A1S 58W TL E4 IMARK
|
|
|
|
|
|
|
|
4. ZT350-GK front brake disc aftermarket components (including brake disc ring gear)
|
|
|
|
|
|
|
|
5. ZT350-GK front brake disc (320×5.0)
|
|
|
|
|
|
|
|
6. Non-standard inner hex bolt M8×25 (environmental color)
|
|
|
|
|
|
|
Quantity
|
|
|
5
|
|
Remarks: If used in brake discs thread fastening glue should be applied to prevent loosening. Standard torque is 24N.m.Use a 6mm Allen wrench.
|
|
|
|
7. ZT350-GK ABS induction ring gear (60 teeth)
|
|
|
|
|
|
|
|
8. GB12615 φ3.2×9 rivet (stainless steel)
|
|
|
|
|
|
|
Quantity
|
|
|
5
|
|
Remarks: Blind rivets require special tools for installation.
|
|
|
|
9. ZT350 tire pressure sensor (M8 elbow joint/120°)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Pay attention to the orientation when installing,elbow to the left.The tire repair fluid should not be used because it will block the stoma of the pressure monitoring sensor,resulting in dificulty in inflating or failure of tire pressure momnitoring .
|
|
|
|
10. ZT350 Tire Pressure Sensor N (M8 Elbow/120°)(after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Pay attention to the orientation during installation. Tire sealant is prohibited as it may clog the air hole of the tire pressure monitoring sensor, leading to inflation difficulty or TPMS failure. For 310M models, please check that there is a light sensor in the upper right corner of the instrument cluster before purchasing this product. The old aluminum alloy hex nut indicated by the arrow requires a size 12 wrench; it will be switched to a stainless steel lock hex nut requiring a size 13 wrench around September 24,2026. Tightening torque: 7N. m.
|
|
|
|
11. Wheel speed sensor(A)
|
|
|
|
|
|
|
|
12. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
13. Wheel speed sensor clamp
|
|
|
|
|
|
|
|
14. Oil seal TC φ28×φ42×7
|
|
|
|
|
|
|
|
15. GB276 Deep groove ball bearing 6004-2RS-C3
|
|
|
|
|
|
|
|
16. Reverse buckle Velcro strap (20×150mm)
|
|
|
|
|
|
|
|
17. ZT350-GK Spoke of tubeless spoke rim（L=148.2）
|
|
|
|
|
|
|
Quantity
|
|
|
40
|
|
Remarks: Rotate the spoke wheel to the position indicated by the arrow and observe the direction of the spokes. The spokes with the same direction or color are the same specifications.The color shown is only used to distinguish the spoke length,not the actual color.
|
|
|
|
18. ZT310-T vacuum spoke wheel nut
|
|
|
|
|
|
|
Quantity
|
|
|
40
|
|
Remarks:T30 plum hexagon wrench is reqiured.
|
|
|
|
19. ZT310－T Vacuum spoke wheel female set screw M4
|
|
|
|
|
|
|
Quantity
|
|
|
40
|
|
Remarks:2# inner hexagon wrench is reqiured.
|
|
|
|
20. ZT350 independent valve (M8 elbow/120°)(after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Pay attention to the orientation during installation. Tire sealant should not be used, as it may clog the air hole of the tire pressure monitoring sensor, leading to difficulty in inflation or failure of the tire pressure monitoring system. The old aluminum alloy hex nut indicated by the arrow requires a No. 12 wrench, and it will be switched to a stainless steel lock hex nut requiring a No. 13 wrench around September 24,2026. Tightening torque: 7N. m.
|
|
|
|
21. Wheel rim balancing block (15g-Norton rubber-XT)
|
|
|
|
|
|
|
|
22. Wheel rim balancing block (10g-Norton rubber-XT)
|
|
|
|
|
|
|
|