1. ZT1P77MP driven wheel sub-components (without cover)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remark:Please purchase this part for 368D/M units manufactured before September 15, 2024. Unauthorized disassembly of this part is strictly prohibited, and damage caused by unauthorized disassembly is not covered by the warranty.It is recommended to use Montblanc brand molybdenum-based grease. Since the grease has been pre-filled before leaving the factory, small-packaged grease cannot be provided. If self-maintenance is required, genuine products can be purchased through other channels.
|
|
|
|
2. ZT1P77MP driven wheel shoe assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: If you need to replace the hoof block separately, you need to confirm the status of the hoof block on the back of the hoof block before purchasing, as shown in the figure. Disassembling and assembling this component requires strong hands-on ability, please evaluate it yourself before placing an order. During installation, the locking torque of the M44 × 1.0 thin nut on the driven wheel is 100N.m. To remove the nut on the driven wheel hoof block assembly, use a 55 #sleeve.
|
|
|
|
3. ZT1P77MP driven wheel shoe assembly
|
|
|
|
|
|
|
|
4. ZT1P77MP Driven Pulley Assembly
|
|
|
|
|
|
|
|
5. ZT1P77MP Driven Pulley Variable Spring
|
|
|
|
|
|
|
|
6. ZT1P77MP driven wheel clutch spring
|
|
|
|
|
|
|
Quantity
|
|
|
5
|
|
Note: To ensure consistent spring performance, a complete set must be replaced simultaneously.
|
|
|
|
7. ZT1P77MP driven wheel with φ55×φ2 silicone O-ring
|
|
|
|
|
|
|
|
8. ZT1P77MP driven wheel with dimensions φ 58.42 × φ 2.62 silicone O-ring
|
|
|
|
|
|
|
|
9. ZT1P77MP driven wheel moving axis oil seal
|
|
|
|
|
|
|
|
10. ZT1P77MP driven wheel roller guide pin
|
|
|
|
|
|
|
|
11. ZT1P77MP driven wheel roller guide ring
|
|
|
|
|
|
|
|
12. ZT1P77MP driven wheel roller guide pin guard cover
|
|
|
|
|
|
|
|
13. 6904LU deep groove ball bearing
|
|
|
|
|
|
|
|
14. HKS25×33×18PXI Needle Bearing
|
|
|
|
|
|
|
|
15. ZT1P77MP driven pulley damping rubber ring
|
|
|
|
|
|
|
|
16. ZT1P77MP driven wheel M44×1.0 thin nut
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18. ZT1P79MP driven wheel spring sleeve
|
|
|
|
|
|
|
|