1. ZT350-R steering bearings aftermarket assembly
|
|
|
|
|
|
|
|
2. ZT350-R lower connection Board (with bead top)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 1 piece of “1134300-003000 ZT350－R lower shaft ring”and“1244300-015000 ZT350－R dust cap(down)”are included. If the front fork is slightly swayed when the brake is found or the direction is swung, check whether the front tire pressure is the recommended air pressure at room temperature: 280kPa. If it is lower than the recommended air pressure, first inflate the front tire air pressure to 300 kPa, then deflate to 280kPa, and test the vehicle to check whether it is released. If the front wheel is otherwise lifted and turned to check the tire tread, the front tire should be replaced if it is eccentric or deformed. If the above operation cannot be solved, check if the adjusting nut is loose.
|
|
|
|
3. ZT350-R dust cap(down)
|
|
|
|
|
|
|
|
4. ZT350-R lower shaft ring
|
|
|
|
|
|
|
|
5. ZT350-R conjoined steel ball
|
|
|
|
|
|
|
|
6. GB70.1 Hexagonal Socket M8×30 (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs.
|
|
|
|
7. ZT250-S Adjusting nut locking washer(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
8. ZT250-S direction column adjusting screw nut M24×1 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: The thread is M24 × 1.
|
|
|
|
9. ZT250-S Adjusting nut rubber gasket (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
10. ZT250-S conjoined steel ball (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
11. ZT250-S shaft ring (after-sale)
|
|
|
|
|
|
|
|
12. ZT350-R upper dust cover
|
|
|
|
|
|
|
|
13. ZT250-S upper steel bowl (after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Note that it must be pressed in place.
|
|
|
|
14. ZT350-R lower seat ring
|
|
|
|
|
|
|
|