1. ZT350-R steering bearings aftermarket assembly
|
|
|
|
|
|
|
|
2. ZT350-R lower connection Board (with bead top)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 1 piece of “1134300-003000 ZT350－R lower shaft ring”and“1244300-015000 ZT350－R dust cap(down)”are included. If the front fork is slightly swayed when the brake is found or the direction is swung, check whether the front tire pressure is the recommended air pressure at room temperature: 280kPa. If it is lower than the recommended air pressure, first inflate the front tire air pressure to 300 kPa, then deflate to 280kPa, and test the vehicle to check whether it is released. If the front wheel is otherwise lifted and turned to check the tire tread, the front tire should be replaced if it is eccentric or deformed. If the above operation cannot be solved, check if the adjusting nut is loose.
|
|
|
|
3. ZT350-R dust cap(down)
|
|
|
|
|
|
|
|
4. ZT350-R lower shaft ring
|
|
|
|
|
|
|
|
5. ZT350-R conjoined steel ball
|
|
|
|
|
|
|
|
6. GB70.1 Hexagonal Socket M8×30 (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs.
|
|
|
|
7. ZT250-S Adjusting nut locking washer(5 pcs/after-sale)
|
|
|
|
|
|
|
|
8. ZT250-S direction column adjusting screw nut M24×1 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: The thread is M24 × 1.
|
|
|
|
9. ZT250-S Adjusting nut rubber gasket (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small, for the convenience of packing and shipping, it is required that this part be sold in packs/bags/boxes of 5 pieces. The assembly quantity in the assembly indicates the actual usage of this part in the current assembly (the assembly quantity is not multiplied by 5), so please be sure to pay attention to the quantity (this quantity is multiplied by 5) when placing an order to avoid over-purchasing.
|
|
|
|
10. ZT250-S conjoined steel ball (5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small, for the convenience of packing and shipping, it is required that this part be sold in packs/bags/boxes of 5 pieces. The assembly quantity in the assembly indicates the actual usage of this part in the current assembly (the assembly quantity is not multiplied by 5), so please be sure to pay attention to the quantity (this quantity is multiplied by 5) when placing an order to avoid over-purchasing.
|
|
|
|
11. ZT250-S shaft ring (after-sale)
|
|
|
|
|
|
|
|
12. ZT350-R upper dust cover
|
|
|
|
|
|
|
|
13. ZT250-S upper steel bowl (after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Note that it must be pressed in place.
|
|
|
|
14. ZT350-R lower seat ring
|
|
|
|
|
|
|
|