1. ZT1P72MN cylinder head sub-assembly
|
|
|
|
|
|
|
|
2. GB276－6002－RS/P5C3 deep groove ball bearing
|
|
|
|
|
|
|
|
3. AYM8-M8×38 double head 10.9 studs bolts(environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
4. ZT1P58MJ valve lock clip
|
|
|
|
|
|
|
Quantity
|
|
|
8
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
5. ZT1P72MN valve spring retainer
|
|
|
|
|
|
|
|
6. ZT1P72MN valve spring base
|
|
|
|
|
|
|
|
7. ZT1P72MN intake and exhaust valve spring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9. ZT1P72MN exhaust valve
|
|
|
|
|
|
|
|
10. Φ5.0 valve stem diameter oil seal
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
11. ZT1P72MN cylinder head wire clamp bracket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: If the spark plug removed from the vehicle has a nut on its head, you can unscrew the nut from thespark plug and install it on this spark plug for use. The following operations are likely to cause carbon deposits on the spark plug: 1. Revving the engine while stationary; 2. Long-term short-distance low-speed driving; 3. Driving when the engine temperature is too low. Use a 14# socket to remove the spark plug. The standard gap is 0.8 - 0.9mm.
|
|
|
|
13. φ 8.85 valve clearance adjusting pad
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks: The picture form is all the size specifications , please Remarks clearly the required specifications when buying, otherwise it will be shipped randomly.The prices of all specifications are the same, and the unit price only corresponds to one of the specifications, not the cumulative sales price of all specifications in the table above.
|
|
|
|
14. ZT1P72MN intake and exhaust rocker shaft
|
|
|
|
|
|
|
|
15. ZT1P72MN intake rocker arm sub-assembly
|
|
|
|
|
|
|
|
16. ZT1P72MN exhaust rocker arm sub--assembly
|
|
|
|
|
|
|
|
17. GB70.1M5×15－5# Hexagon socket head screw (grade 10.9/black oxide)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
18. ZT1P72MN rocker limit block
|
|
|
|
|
|
|
|
19. M10×1.25 hexagon flange nut (10 grade/black oxide)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21. M8×110 Hexagonal flange bolt (9.8 grade/environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: If the production date of ZT350T-D is before 2022-07-12, please purchase this part for after sale; If the production date is after 2022-07-12, please buy "1251112-024000 M8×1×117 hex flange bolts (grade 10.9 / black oxide)" for after sale; If you can't decide how to buy, you can fill in the feedback form. This bolt is disposable and needs to be replaced every time it is disassembled.
|
|
|
|
|
|
|
|
|
|
|
|
|
23. ZT1P72MN cylinder head gasket
|
|
|
|
|
|
|
|
24. communal sensor of water and oil(after-sale)
|
|
|
|
|
|
|
|
25. φ9×φ2 EPDM O-ring(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
26. 6.3×12×1.6 copper gasket(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
27. GB16674 M6×16 Hexagon flange bolts (9.8 grade/environmental color Zinc)
|
|
|
|
|
|
|
|
28. M6×10 top pin bolt (Eco-Friendly Color Zinc)
|
|
|
|
|
|
|
|
29. ZT1P72MN cylinder head pressure plate
|
|
|
|
|
|
|
|
30. ZT1P72MN camshaft bearing pressure plate
|
|
|
|
|
|
|
|
31. ZT1P72MN decompression camshaft sub-assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Please check the status of this part before placing an order. If it is the old model, you need to purchase "1050170-001000 ZT1P72MN timing driven sprocket". If for the new direct order purchase can be.
|
|
|
|
32. Φ11.8×φ1.9 fluorine rubber O-ring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|