216.73.216.217
1.Choose goods
2.Submit orders
3.Pay online
4.Confirm goods received
5.Evaluation
         


0

Receiving address：
*
ZT310-X Press block assembly
单价总客 编码数量
   Return
High
Low
 
 
 
1. ZT310-R press block of handle bar(home-made)
Code：1134200-005000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
80
Remarks:Assembly direction must tighten the front 2 bolts before tightening the rear bolts. 
2. ZT250-S M8 bolt decorative buckle (titanium gold)
Code：4044102-001051  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
3
 
3. GB70.1 Hexagonal Socket M8×30 (color Zinc)
Code：1250205-034093  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
2
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs. 
4. ZT310-X direction to put the block assembly
Code：1134200-013000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
81
Stop sale
Remarks: Contains 1251111-006000 ZT310-R studs. The direction bar pad block and the stud bolt are assembled together with a special double-head stud sleeve portion, and the thread fastening rubber is applied to strengthen the fastening function of the stud bolt, and it is difficult to remove and tighten the double head bolts after the subsequent replacement is required. It is recommended to replace the whole set. If only the studs are replaced, the assembly must be in place and sturdy. We will not be responsible for any damage caused by improper assembly.Due to the change of state,this section is suspended,you can buy"4094200-009000 ZT310－X direction pad M10×1.25（titanium/spray paint）after-sales assembly ”instead,it's recommended to buy 2 pcs at the same time. 
5. ZT310-R double head screw
Code：1251111-006000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
11
Remark: If you need to replace the double studs separately, you can lock the two M10×1.5 nuts to each other as shown in the small figure and then use the sleeve to turn clockwise to remove the studs. When replacing a new stud, you must apply a threaded fastening to prevent loosening. It is necessary to ensure that the assembly is in place and firm, and we are not responsible for any damage caused by improper assembly. 
6. ZT310-X direction pad M10×1.25(titanium/spray paint)after-sales assembly
Code：4094200-009000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
74
 
7. ZT310-R gasket of upper connecting board
Code：1274200-018000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
2
 
8. ZT310-R bushing φ10×φ12×41
Code：1251700-065000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
5
 
9. ZT310-R buffer rubber of upper connecting board
Code：1244200-008000  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
2
 
10. Non-standard nut M10×1.5(Dacromet)
Code：1251300-057093  
Local Inventory Unit Price (￥) Equipment Quantity Quantity Sum (￥)   Choose   Buy
in stock
3