18.219.112.111
1.Choose goods
2.Submit orders
3.Pay online
4.Confirm goods received
5.Evaluation
         


0

Adresse de livraison：
*
ZT310-X Press block assembly
单价总客 编码数量
   De retour
 
 
 
1. ZT310-R press block of handle bar(home-made)
Code de marchandise：1134200-005000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
80
Remarks:Assembly direction must tighten the front 2 bolts before tightening the rear bolts. 
2. ZT250-S M8 bolt decorative buckle (titanium gold)
Code de marchandise：4044102-001051  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
3
 
3. GB70.1 Hexagonal Socket M8×30 (color Zinc)
Code de marchandise：1250205-034093  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
2
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs. 
4. ZT310-X direction to put the block assembly
Code de marchandise：1134200-013000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
81
Stop sale
Remarks: Contains 1251111-006000 ZT310-R studs. The direction bar pad block and the stud bolt are assembled together with a special double-head stud sleeve portion, and the thread fastening rubber is applied to strengthen the fastening function of the stud bolt, and it is difficult to remove and tighten the double head bolts after the subsequent replacement is required. It is recommended to replace the whole set. If only the studs are replaced, the assembly must be in place and sturdy. We will not be responsible for any damage caused by improper assembly.Due to the change of state,this section is suspended,you can buy"4094200-009000 ZT310－X direction pad M10×1.25（titanium/spray paint）after-sales assembly ”instead,it's recommended to buy 2 pcs at the same time. 
5. ZT310-R double head screw
Code de marchandise：1251111-006000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
11
Remark: If you need to replace the double studs separately, you can lock the two M10×1.5 nuts to each other as shown in the small figure and then use the sleeve to turn clockwise to remove the studs. When replacing a new stud, you must apply a threaded fastening to prevent loosening. It is necessary to ensure that the assembly is in place and firm, and we are not responsible for any damage caused by improper assembly. 
6. ZT310-X direction pad M10×1.25(titanium/spray paint)after-sales assembly
Code de marchandise：4094200-009000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
74
 
7. ZT310-R gasket of upper connecting board
Code de marchandise：1274200-018000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
2
 
8. ZT310-R bushing φ10×φ12×41
Code de marchandise：1251700-065000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
5
 
9. ZT310-R buffer rubber of upper connecting board
Code de marchandise：1244200-008000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
2
 
10. Non-standard nut M10×1.5(Dacromet)
Code de marchandise：1251300-057093  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
3