216.73.216.97
1.Choose goods
2.Submit orders
3.Pay online
4.Confirm goods received
5.Evaluation
         


0

Adresse de livraison：
*
ZT250-S oil/oil filter assembly
单价总客 编码数量
   De retour
 
 
 
1. ZONTES Engine oil (SN5W-40/1L)
Code de marchandise：3070100-012100  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
78
 
2. ZT173YMM refined filter seal component(carton packaging)
Code de marchandise：4134100-002000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
46
Remarks:Included refiner,ZT173YMM oil refiner seal and 64.7×2.65 O-ring. 
3. 64.7×2.65 Acrylate rubber o-rings
Code de marchandise：1051453-004000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
5
Remarks: It is recommended to remove the fine filter cover and replace with a new O-ring to prevent leakage. 
4. M12×1.5×15 ablassschraube (9.8 grade/environmental color Zinc)
Code de marchandise：1251100-066093  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
5
Remark: It is recommended to replace the combination seal 12×φ20×2 at the same time of replacing the oil. ZT310/350 &250-S/R series knight car the standard torque is 24±4N.m;KD/ZT125/150/155-U/U1/G1/Z2/GK is 25±3N.m;ZT125/310/350/368 series scooters 25N.m. 
5. Combined sealing gasket 12×φ20×2
Code de marchandise：1244100-033000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
4
Remarks: It is recommended to replace with the new parts after disassembly to prevent leakage. 
6. ZT173YMM fine filter oil seal
Code de marchandise：1051453-008000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
5
Remarks: Be careful not to leak the seal ring. 
7. Non-standard M6×25.5 double-head 9.8 studs bolts (environmental color Zinc)
Code de marchandise：1251111-013000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
1
Remarks: ① and ② of the old model have been discontinued. If you need to replace the old double-headed studs, you must purchase them in pairs. "1251300-096000 Non-standard cover-shaped 9-grade nut M6×13 (environmentally protection color zinc)"; if it is ①, and it needs to chamfer 1.5~2 on the fine filter cover before assembly.This stud cannot be used in the engine cylinder head of the 200 model.  
8. Non-standard cover type 9 degree nut M6×13 (environmental color Zinc)
Code de marchandise：1251300-096000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
1
Remarks:0# Sleeve. This is a new, taller nut. If you need to replace the stud, you must purchase this taller nut at the same time. This nut can replace the old, shorter nut, and for the sake of uniformity, it is recommended to replace them simultaneously. For water-cooled series models such as KD150-U/G1/Z2, the standard torque is 10N ± 1.5N.m; for series models such as ZT310, ZT350, ZT250-S/R, it is 12N ± 1.5N.m; for ZT310T-M, it is 10N ± 1N.m. Starting from February 19, 2025, the two nuts at the ECU installation location of ZT350-V1/VX/S will be switched to this model, and the original nuts will be phased out. It is recommended to purchase 2 pieces for replacement at the same time.