216.73.216.120
1.Choose goods
2.Submit orders
3.Pay online
4.Confirm goods received
5.Evaluation
         


0

Adresse de livraison：
*
ZT173YMM right crankcase cover subassembly parts B (aftersales parts)
单价总客 编码数量
   De retour
 
 
 
1. ZT173YMM right crankcase cover B (with oil plug)
Code de marchandise：4050453-006000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
295
Remarks: Only contain oil plug. Please check the clutch lever seat of the left hand to confirm the same status and then place the order. The clutch will be improved from September 10, 2018. The part needs to be unified with the clutch rocker to be used normally. 
2. FB12×18×5 fluorine rubber seal
Code de marchandise：1051553-004000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
6
Remarks: Confirm you have ability to assemble and place orders 
3. GB290-HK1210 needle rolling bearing
Code de marchandise：1250602-024000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
3
Remarks: Confirm you have ability to assemble and place orders 
4. FB14×22×5 Hydrogenated nitrile oil seal.
Code de marchandise：1051553-002000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
6
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.  
5. type hole circlip φ24×1
Code de marchandise：1051354-013000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
1
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.  
6. Non-standard M6×25.5 double-head 9.8 studs bolts (environmental color Zinc)
Code de marchandise：1251111-013000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
1
Remarks: ① and ② of the old model have been discontinued. If you need to replace the old double-headed studs, you must purchase them in pairs. "1251300-096000 Non-standard cover-shaped 9-grade nut M6×13 (environmentally protection color zinc)"; if it is ①, and it needs to chamfer 1.5~2 on the fine filter cover before assembly.This stud cannot be used in the engine cylinder head of the 200 model.  
7. Non-standard cover type 9 degree nut M6×13 (environmental color Zinc)
Code de marchandise：1251300-096000  
Inventaire local Prix unitaire (￥) Quantité demandée Quantité montant (￥)   Sélection   Acheter
Adéquat
1
Remarks:This is a raised nut.If the stud needs to be replaced,the raised nut must be purchase at the same time.This nut can replace the old low nut.It is recommended to replace them at the same time in order to unify.KD/ZT125-155-U/G1/Z2 water-cooled series standard torque is 10N ± 1.5N.m，ZT310、ZT350、ZT250-S/R series：12N ± 1.5N.m，ZT310T-M：10N±1N.m.