1. ZT310-V rear skirt (dark grey matte)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Users whose production date is before June 2020 need to manually cut off the red part of the picture after purchasing the tail group before they can be installed and used normally.If you need to replace the rear tail skirt, it is recommended to purchase a piece of "1226400-188000 Velcro (External Single Antenna)" for pasting PKE antenna.
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
4. Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5
|
|
|
|
|
|
|
|
5. Buffer rubber of flanging bushing (φ8.5×φ14×1)
|
|
|
|
|
|
|
|
6. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
7. Flanging bushing rubber (φ11×φ16×1)
|
|
|
|
|
|
|
|
8. Non-standard inner hex bolt M8×25 (environmental color)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: If used in brake discs thread fastening glue should be applied to prevent loosening. Standard torque is 24N.m.
|
|
|
|
9. ZT310-V PKE small cap (dark grey matte)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:The PKE position of V series lithium battery is shown in the picture.The V colloidal battery and the V1 and VX series models are in the right cover position.
|
|
|
|
10. ZT310-V rear tail skirt small cover (dark gray matte)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Use this small cover to block the hole in the tail skirt when the backrest is not installed. The small picture shows the assembly position of the part. When the whole vehicle is shipped from the factory, 2 pieces are delivered in the motorcycle box.
|
|
|
|
11. Back cover of ZT310-V back skirt (dark grey matte finish)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Use this small cover to block the hole in the tail skirt when the backrest is not installed. The small picture shows the assembly position of the part. When the whole vehicle is shipped from the factory, 2 pieces are delivered in the motorcycle box.
|
|
|
|
12. ZT310-V rear end skirt front small cover double-sided adhesive tape
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks: Replace with genuine 3M double-sided tape. When the whole vehicle is shipped from the factory, 4 pieces are delivered in the motorcycle box.
|
|
|
|
13. ZT310-V rear aluminum alloy bracket (deep bright grey)
|
|
|
|
|
|
|
|
14. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
15. GB5789M8×20(color Zinc)
|
|
|
|
|
|
|
|
16. Velcro (external single antenna )
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:The external PKE antenna of individual models is pasted on the cover, and it is recommended to purchase this part at the same time if you need to replace the cover.
|
|
|
|