1. ZT310 Rear sub fender rear section assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The complete set of sub-mud plate has been assembled.
|
|
|
|
2. ZT310 Rear Vice fender parts assembly (250R， 310R/X/T)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The accessories are needed when assemble the secondary mud board to the vehicle.When assembling the ZT250/310-R model auxiliary mud plate assembly, it must be noted that the bolt at the left chain adjustment must use the method of M8×30 bolt + spring pad + gasket; It is forbidden to use M8×35 bolts or missing reload pads and gaskets, otherwise there is a risk of breaking the left chain adjustment or rear flat fork, and the parts caused by incorrect assembly methods will not be three guarantes.
|
|
|
|
3. Rear advertising plate (ZONTES)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 2 pieces of M6×12 bolts and 2 pieces of GB6177.1M6 (environmental color) are required.
|
|
|
|
4. GB6177.1M6 (environmental color)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
5. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|