1. ZT310-R1 rear sub-mud aluminum alloy bracket (dump black)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The aluminum alloy bracket and the retaining plate have been changed the states. If your vehicle is manufactured before April 27, 2019, need purchase a "1224200-106000 ZT310-R1 rear auxiliary mud board retaining plate" at the same time. This material can be purchased directly if the vehicle was produced after April 27, 2019.The old model can be replaced by a new model.
|
|
|
|
2. GB97.1 φ10(white Zinc)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. Non-standard inner hex bolt M8×25 (environmental color)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: If used in brake discs thread fastening glue should be applied to prevent loosening. Standard torque is 24N.m.
|
|
|
|
5. ZT310 Rear sub mudguard iron holder assembly(improved)
|
|
|
|
|
|
|
|
6. ZT310-R rear auxiliary mud plate iron bracket front section
|
|
|
|
|
|
|
|
7. ZT310-V rear auxiliary clay plate and iron bracket rear section
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: At the connection between the front section and the rear section of the rear auxiliary mudboard iron bracket, thread fastening glue should be added when installing the screws in the threaded holes. The material is Baosteel 436L stainless steel, and the surface is electrophoresed in black.
|
|
|
|
8. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
9. GB5789M6×16 (environmental color)
|
|
|
|
|
|
|
|
10. Flanged bushing φ6.2×φ8.4×3.5＋φ14×1.5(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
9
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
11. flanging bushing buffer rubber (φ8.5×φ14×1)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
9
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
12. GB93 φ8 (environmental color)
|
|
|
|
|
|
|
|
13. ZT310-R1 rear auxiliary mud board retaining plate
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The aluminum alloy bracket and the retaining plate have been changed the states. If your vehicle is manufactured before April 27, 2019, needed purchase a "1020242-265021 ZT310-R1 rear sub-mud aluminum alloy bracket (homemade)" at the same time. This material can be purchased directly if the vehicle was produced after April 27, 2019.
|
|
|
|
14. ZT310-R rear mudguard fender
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Due to the structural optimization, the old model will be switched to the new model after the inventory is consumed, and should be reduced accordingly "Non-standard bolt M6×16 (304 stainless steel)", "GB93 φ 8 (environmental color) "and "Plywood M6×11×15(color zinc)" 2 pieces each.
|
|
|
|
15. Plywood M6×11×15(zinc-nickel)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
16. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
17. ZT250-S rear reflector(after-sale)
|
|
|
|
|
|
|
|
18. ZT250-S rear liceness buffer rubber(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
19. φ8 clip(L=73)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
20. ZT310 rear turn signal (including license plate light)
|
|
|
|
|
|
|
|
21. HJ125-6 rear license light bracket
|
|
|
|
|
|
|
|
22. Rear advertising plate (ZONTES)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 2 pieces of M6×12 bolts and 2 pieces of GB6177.1M6 (environmental color) are required.
|
|
|
|
23. GB97.1φ8 (environmental color)
|
|
|
|
|
|
|
|
24. GB6177.1M6 (environmental color)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
25. ZT310-R adapter cable of vice fender(L=2000)
|
|
|
|
|
|
|
|
26. ZT310 Rear sub fender wire rubber plug
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Added on March 11,2019.The previously produced vehicles without equipped with this rubber plug and can be purchased separately.The small picture shows the installation position of the rubber plug.
|
|
|
|
27. ZT310 rear turn signal bracket
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Vehicles manufactured after April 1, 2018 can purchase this material directly. Vehicles manufactured before April 1, 2018 are of old structure, so it is necessary to purchase flanging Bush buffer rubber + flanging Bush + non-standard bolt M6 together × 12 + two splints. If it is used for the upper mudguard (i.e. the rear license plate is on it, not on the auxiliary mudguard), the boss on the rear mudguard shall be cut off by itself, or the quality feedback sheet shall be written for guidance by the engineer.
|
|
|
|
28. ZT310-X Rear left turning light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). If you have any questions, please contactyour sales.
|
|
|
|
29. ZT310-X Rear right turning light
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). If you have any questions, please contactyour sales.
|
|
|
|
30. ZT310-X Liensed lights
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT310-R/X produced before March 1,2018 needs to be purchased with the 1184200-032000 ZT310-R rear turn signal cable (L=600). Does not contain screws，you can purchase "1251200-057093 Non-standard cross self-tapping screw ST3.0×7 (color zinc)".
|
|
|
|
31. Non-standard cross self-tapping screw ST3.0×7 (color zinc)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
5
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
32. ZT310-X rear left turn signal fixing bracket
|
|
|
|
|
|
|
|
33. ZT310-X rear right turn signal fixing bracket
|
|
|
|
|
|
|
|
34. Non-standard cross self-tapping screw ST3.8×10 (military green)
|
|
|
|
|
|
|
|
35. ZT310 rear turn signal fixing wire clip
|
|
|
|
|
|
|
|
36. Hexagon socket head screw M6×16+8.5×5 SUS302
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:This bolt can be used to replace the structure of "M6×16 Bolt + GB 96.1 φ 6 + flanging bushing buffer glue + muffler anti-ironing plate bushing". Such as U rear fender / X rear fender and rear fender steering bracket in front of the installation point.
|
|
|
|