1. ZT250-S shift lever spline rocker arm
|
|
|
|
|
|
|
|
2. M6×22 Hex flang bolt thread (8.8 garde/environmental color Zinc)
|
|
|
|
|
|
|
|
3. Miniature rod end ball bearing SALJK6C
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: The thread can be straight up and the direction of the thread can be observed. This is the left-hand thread (the left side is higher than the right side). The old model printed with"SALJK6C" on the end ,the new model molded "L" on one side.Two types of random shipping,only differences in appearance do not affect use.
|
|
|
|
4. GB6177.1M6 (environmental color)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
5. GB6170 M6-LH(color Zinc )
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Left-handed nut. The direction of the corresponding bolt thread can be observed to distinguish.
|
|
|
|
6. ZT250-S shift lever adjusting screw φ10×150(Black Zinc)
|
|
|
|
|
|
|
|
7. GB6170M6 (environmental color)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
8. Miniature rod end ball bearing SAJK6C
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: The thread can be straight up and the direction of the thread can be observed. This is a right-hand thread (left side is lower than the right side). The old model printed with"SAJK6C" on the end,the new model molded "R" on one side.Two types of random shipping,only differences in appearance do not affect use.
|
|
|
|
9. ZT310-V second generation shift lever rocker arm
|
|
|
|
|
|
|
|
10. ZT310 front fender liner(Black Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: ZT310-V model shift lever step arm rocker arm installation position is one piece for the front hole position relative to the factory position, it needs to ues 2 pieces to move to the front position; and two pieces are given in the box before them are out of the factory. It was changed into black since late April 2019.
|
|
|
|
11. ZT310-V shift lever step rocker arm kit (after sale)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:The old stype of the shift lever as shown in small figure was discontinued.It need to purchase this part to replace.
|
|
|
|