1. ZT180MN right crankcase cover 14 (including oil block)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Please check the left hanglebar clutch rocker arm to confirm the status and then place the orders. From September 10, 2018, the clutch was improved. This part needs to be unified with the clutch rocker arm to be used normally.
|
|
|
|
2. ZT180MN Water seal subassembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT180MN water seal sub-assembly includes a water seal static ring and a water seal dynamic ring; the water seal dynamic ring is installed on the pump impeller, and the water seal static ring needs to be press-fitted on the right crankcase cover; please ensure that you have the ability to install it before proceeding. Place an order.
|
|
|
|
3. 6201-C deep groove ball bearing(FAG)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The picture shows the installation position of the bearing on the right crankcase cover of the 310 vehicle engine.
|
|
|
|
4. NY12×23×7 Hydrogenated nitrile rubber oil seal
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Click on the enlarged picture to confirm the specifications before purchasing, and then purchase it by yourself.
|
|
|
|
5. FB12×24×5 HNBR oil seal
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Click on the enlarged picture to confirm the specifications before purchasing, and then purchase it yourself.
|
|
|
|
6. type hole circlip φ24×1
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
7. ZT180MN water pump (insert thread)
|
|
|
|
|
|
|
|
8. ZT180MN Water pump shaft
|
|
|
|
|
|
|
|
9. ZT180MN Water pump gear
|
|
|
|
|
|
|
|
10. φ5×16 cylindrical pin
|
|
|
|
|
|
|
|
11. Thrust washer,12.2×20×1
|
|
|
|
|
|
|
|
12. 9.2 × 18 × 1 Thrust Washer
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The production date of the motorcycles is after mid-December 2019 , and you can purchase this piece directly. If the production date is mid-December 2019, you are recommended to measure the original gasket size before purchasing it yourself.
|
|
|
|
13. ZT180MN oil level gauge
|
|
|
|
|
|
|
|
14. 15×3.1 acrylate adhesive O-ring
|
|
|
|
|
|
|
|
15. ZT180MN clutch lever sub-assembly (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Please check the left hanglebar clutch rocker arm to confirm the status and then place the orders. From September 10, 2018, the clutch was improved. This part needs to be unified with the clutch rocker arm to be used normally.
|
|
|
|
16. ZT173YMM clutch pull rod spring
|
|
|
|
|
|
|
|
17. FB14×22×5 Hydrogenated nitrile oil seal.
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
18. HK1412 needle roller bearing
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
19. ZT180MN inlet and outlet water pipe joints
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The O-ring specification of the water pipe joint is 19×1.5.
|
|
|
|
20. 19×1.5 ethylene propylene terpolymer O shape circle
|
|
|
|
|
|
|
|
21. ZT173YMM right crankcase cover cushion piece
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The gasket of ZT173YMM right crankcase cover is a disposable seal, which needs to be replaced every time it is disassembled.
|
|
|
|