1. ZT250-S shift lever spline rocker arm
|
|
|
|
|
|
|
|
2. M6×22 Hex flang bolt thread (8.8 garde/environmental color Zinc)
|
|
|
|
|
|
|
|
3. Miniature rod end ball bearing SALJK6C
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: The thread can be straight up and the direction of the thread can be observed. This is the left-hand thread (the left side is higher than the right side). The old model printed with"SALJK6C" on the end ,the new model molded "L" on one side.Two types of random shipping,only differences in appearance do not affect use.
|
|
|
|
4. GB6177.1M6 (environmental color)
|
|
|
|
|
|
|
|
5. GB6170 M6-LH(color Zinc )
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Left-handed nut. The direction of the corresponding bolt thread can be observed to distinguish.
|
|
|
|
6. ZT250-S shift lever adjusting screw φ10×150(Black Zinc)
|
|
|
|
|
|
|
|
7. GB6170M6 (environmental color)
|
|
|
|
|
|
|
|
8. Miniature rod end ball bearing SAJK6C
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: The thread can be straight up and the direction of the thread can be observed. This is a right-hand thread (left side is lower than the right side). The old model printed with"SAJK6C" on the end,the new model molded "R" on one side.Two types of random shipping,only differences in appearance do not affect use.
|
|
|
|
9. ZT310-V second generation shift lever rocker arm
|
|
|
|
|
|
|
|
10. ZT310 front fender liner(Black Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: ZT310-V model shift lever step arm rocker arm installation position is one piece for the front hole position relative to the factory position, it needs to ues 2 pieces to move to the front position; and two pieces are given in the box before them are out of the factory. It was changed into black since late April 2019.
|
|
|
|