1. ZT310-T1 harness assembly
|
|
|
|
Quantity
|
|
1
|
Remark: The whole vehicles produced before April 27, 2019 including TFT instrument , it is necessary to add one more ZT250-S EFI relay, otherwise the headlights will not be able to light up normally.
|
|
|
2. ZT310 Electric spray Ignition Coil (rubber cap)
|
|
|
|
|
3. 0 level fire-retardant belting (black2.5×100)
|
|
|
|
|
4. Grade 0 flame retardant tie (black 3.6×295)
|
|
|
|
|
5. ZT250-S fuel-injection relay
|
|
|
|
Quantity
|
|
3
|
Remarks: Model KH-1A4T-R.
|
|
|
|
|
|
|
|
7. ZT250-R dump switch sleeve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
1
|
Remarks:Note that the drain hole indicated by the arrow should be down or at a low positioon to avoid buzzer silencing dute to water accumulation.
|
|
|
10. ZT310 charging adapter cable
|
|
|
|
Quantity
|
|
1
|
Remarks: Some models produced before April 26, 2019 have brought this adapter cable. The vehicles subsequent produced will incorporate this adapter cable into the main cable and will not be disassembled. If you do not purchase this adapter cable, you can change the cable yourself. When you change the cable, you must take protective measures (such as short circuit protection, waterproof, etc.) and correctly distinguish the positive and negative poles.
|
|
|
|
|
|
|
|
12. ZT310-R rectifier(Lithium)
|
|
|
|
|
13. GB6177.1M6 (environmental color)
|
|
|
|
|
14. ZT310 Electric seat lock
|
|
|
|
|
15. ZT310 electronic cushion lock block
|
|
|
|
Quantity
|
|
1
|
Remarks:This part stop selling,you can buy "1226400-269000 ZT368T-E electronic cushion lock block"and"1251100-102000 Non-standard bolt M6×16 (304 stainless steel)" instead.
|
|
|
16. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
17. ZT368T-E Electronic Cushion Lock Guide Block
|
|
|
|
|
18. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
19. Pin tie (Black 4.8×130)
|
|
|
|
|
20. ZT310-R relay of side support
|
|
|
|
Quantity
|
|
1
|
Remarks: Model G8HN-1C4T-RJ.
|
|
|
21. ZT310 univsersal fuse (10A small)
|
|
|
|
Quantity
|
|
8
|
Remarks: Small 10A.
|
|
|
22. ZT310 univsersal fuse (15A small)
|
|
|
|
Quantity
|
|
6
|
Remarks: Small 15A.
|
|
|
23. ZT310 univsersal fuse (25A small)
|
|
|
|
Quantity
|
|
3
|
Remarks: Small 25A.
|
|
|
24. ZT250-S fuze wire (15A)
|
|
|
|
Quantity
|
|
1
|
Remarks: KST brand medium 15A fuse.
|
|
|
25. ZT310 PKE Assembly (enlarge battery induction key)
|
|
|
|
Quantity
|
|
1
|
Remarks: The battery type of the sensor key is CR2032.
|
|
|
26. ZT310 PKE new version (band version )
|
|
|
|
Quantity
|
|
1
|
Remarks: The old "ZT310 PKE Controller (Single Antenna)" for ZT250-R National IV and 310 series models can purchase this assmbly directly and the antenna uses the single antenna of the original car.If the original car is a "ZT310 PKE controller with dual antennas", it must be used with the purchase of "1184200-053000 ZT310PKE external single antenna".The battery type of the sensor key is Camelion CR1225.
|
|
|
27. ZT310 main lock (electromagnetic drive/wire length 450) assembly
|
|
|
|
Quantity
|
|
1
|
Remarks: This is a new type of faucet lock. Please complain about the quality problem according to the faucet lock used in your motorcycles.If you chose the wrong part, engineer may ask you to refill the quality feedback form.Old models can use this model.
|
|
|
28. Button battery (Camelion CR2032)
|
|
|
|
Quantity
|
|
1
|
Remarks:Just for the enlarge battery version PKE Induction Key .
|
|
|