1. ZT180MN sliding clutch right cover subassembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: ZT173YMM right crankcase cover gasket is a disposable seal, which needs to be replaced every time it is disassembled. It is recommended to buy it together.Please confirm the clutch separation rod status before placing an order. If the clutch separation rod is in old condition, please purchase ZT180MN clutch separation rod (1050754-006000) and φ8×8×7.4 flat plug (1051754-003000) each. The part assembly contains bearings or oil seals. The specific links are as follows: www.zontes.com＞Mine＞More function＞The download section。
|
|
|
|
2. ZT180MN clutch release lever
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Before purchasing the clutch release lever, please confirm whether the drive shaft contains a plug.① is plug-free drive spindle.You also need to purchase a 1051754-003000 φ8 × 8 × 7.4 flat plug at the same time, knock the plug into the drive spindle.② The drive spindle with plug can be purchased and replaced directly.
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The installation position of this plug is on the main shaft, the specific position can be enlarged to view.
|
|
|
|
4. ZT180MN Water seal subassembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The ZT180MN water seal sub-assembly includes a water seal static ring and a water seal dynamic ring; the water seal dynamic ring is installed on the pump impeller, and the water seal static ring needs to be press-fitted on the right crankcase cover; please ensure that you have the ability to install it before proceeding. Place an order.
|
|
|
|
5. 6201-C deep groove ball bearing(FAG)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The picture shows the installation position of the bearing on the right crankcase cover of the 310 vehicle engine.
|
|
|
|
6. NY12×23×7 Hydrogenated nitrile rubber oil seal
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Click on the enlarged picture to confirm the specifications before purchasing, and then purchase it by yourself.
|
|
|
|
7. FB12×24×5 HNBR oil seal
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Click on the enlarged picture to confirm the specifications before purchasing, and then purchase it yourself.
|
|
|
|
8. FB14×22×5 Hydrogenated nitrile oil seal.
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
9. type hole circlip φ24×1
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
10. GB290-HK1010 needle roller bearing
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
11. HK1412 needle roller bearing
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Be sure to confirm that you have ability to assemble it and then you place an order.
|
|
|
|
12. ZT180MN right cover noise reduction glue
|
|
|
|
|
|
|
|
13. ZT180MN right cover noise reduction plastic shield
|
|
|
|
|
|
|
|
14. Non-standard bolt M6×12 (environmental color)
|
|
|
|
|
|
|
|
15. ZT180MN water pump (insert thread)
|
|
|
|
|
|
|
|
16. ZT180MN Water pump shaft
|
|
|
|
|
|
|
|
17. ZT180MN Water pump gear
|
|
|
|
|
|
|
|
18. φ5×16 cylindrical pin
|
|
|
|
|
|
|
|
19. Thrust washer,12.2×20×1
|
|
|
|
|
|
|
|
20. 9.2 × 18 × 1 Thrust Washer
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The production date of the motorcycles is after mid-December 2019 , and you can purchase this piece directly. If the production date is mid-December 2019, you are recommended to measure the original gasket size before purchasing it yourself.
|
|
|
|
21. ZT180MN oil level gauge
|
|
|
|
|
|
|
|
22. 15×3.1 acrylate adhesive O-ring
|
|
|
|
|
|
|
|
23. ZT180MN clutch rod shaft
|
|
|
|
|
|
|
|
24. GB894.1 shaft retaining ring ∅ 10 (Dacromet)
|
|
|
|
|
|
|
|
25. GB896 opening retaining ring φ9
|
|
|
|
|
|
|
|
26. 10.2×18×1 gasket (Dacromet)
|
|
|
|
|
|
|
|
27. ZT180MN inlet and outlet water pipe joints
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The O-ring specification of the water pipe joint is 19×1.5.
|
|
|
|
28. 19×1.5 ethylene propylene terpolymer O shape circle
|
|
|
|
|
|
|
|
29. ZT173YMM right crankcase cover cushion piece
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The gasket of ZT173YMM right crankcase cover is a disposable seal, which needs to be replaced every time it is disassembled.
|
|
|
|
30. ZT180MN sliding clutch rod torsion spring
|
|
|
|
|
|
|
|
31. ZT180MN clutch lever rocker arm assembly
|
|
|
|
|
|
|
|