1. ZT310-T front disc main pump assembly(without rocker arm)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: It is recommended to purchase 2 pieces of "1251513-013000 disc brake tubing copper washer φ16×φ10×1.2"at the same time to avoid leakage.If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,ZT310-V、ZT250-R/X/T/S(national three) total dosage is 0.170L，ZT310-R/X/T total dosage is 0.180L，KD/ZT-U/G/Z2 total dosage is 0.185L.
|
|
|
|
2. ZT250-R Right handle rocker (Machine)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Because the anodizing process is difficult to ensure that the consistent color for each batch, different products of different batches will have different color ,the colors does not affect normal use.When replacing the brake handle,be sure to remove the nut that comes with the main pump first, and then remove the bolt.Standard torque:8～10N.m.
|
|
|
|
3. ZT310-R second generation right sub-handle switch (TFT)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: This is the second-generation vice switch. You can check the picture to confirm the status before purchasing. If the second-generation secondary switch is replaced for the first-generation secondary switch,it is recommended to purchase 1184200-146000 ZT310-R second-generation left deputy handle switch (TFT) at the same time.
|
|
|
|
4. ZT310-R right hand switch (TFT)
|
|
|
|
|
|
|
|
5. GB70.1M6×30(stainless steel)
|
|
|
|
|
|
|
|
6. ZT250-S right rearview mirror
|
|
|
|
|
|
|
|
7. Disc brake pipe bolt M10×1-22
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks:The standard torque for disc brake tube is 32N.m.
|
|
|
|
8. Disc brake pipe copper washer φ 15× φ 10.2 × 1.5
|
|
|
|
|
|
|
|
9. ZT250-S front disk brake piece(CM102)
|
|
|
|
|
|
|
|
10. ZT250-S rear disk brake pads (CM102)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The back panel is engraved with the words “HT H10” and the print production serial number.
|
|
|
|
11. ZT310-V hydraulic control unit protective cover
|
|
|
|
|
|
|
|
12. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
13. Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5
|
|
|
|
|
|
|
|
14. Buffer rubber of flanging bushing (φ8.5×φ14×1)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
17. ZT310-V hydraulic control unit mounting bracket
|
|
|
|
|
|
|
|
18. GB70.1 inner hex bolt M8×16(color Zinc)
|
|
|
|
|
|
|
|
19. GB16674 M6×16 Hexagon flange bolts (9.8 grade/environmental color Zinc)
|
|
|
|
|
|
|
|
20. ZT250-S flanging sleeve(φ6.4×φ9×6＋φ20×2)
|
|
|
|
|
|
|
|
21. ZT250-S Flanging bushing buffer
|
|
|
|
|
|
|
|
22. ZT310-R No.2 oil pipe support of front disc brake
|
|
|
|
|
|
|
|
23. Non-standard bolt M6×25 (environmental color/10.9 grade)
|
|
|
|
|
|
|
|
24. M6×22 Hex flang bolt thread (8.8 garde/environmental color Zinc)
|
|
|
|
|
|
|
|
25. Non-standard bolt M8×37
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks:24N.m.
|
|
|
|
26. ZT310-V rear disc brake main pump bracket
|
|
|
|
|
|
|
|
27. ZT310-R Rear disc brake pipe clamp
|
|
|
|
|
|
|
|
28. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
29. ZT310-V rear brake main pump piston push rod extension rod
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: One piece is given as a gift when leaving the factory.
|
|
|
|
30. DF30 wheel speed sensor(deactivated)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: White coded "1184200-045000" is printed on the head with bosses and stiffeners.You can purchase the new model "1181200-118000 Wheel Speed Sensor(A)" to replace it.
|
|
|
|
31. Wheel speed sensor(A)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remaks:For the 703RR model for the front wheel, the other models such as the number of 2 for the front and rear wheel.
|
|
|
|
32. Wheel speed sensor clamp
|
|
|
|
|
|
|
|
33. ZT310-T front wheel WSS wire clip
|
|
|
|
|
|
|
|
34. ZT310-T front disc brake cassette brake switch
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remark: Only the brake switch of the front brake main pump, it does not contain other accessories.
|
|
|
|
35. ZT310-T front brake caliper mounting plate
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Only the mounting plate.No calipers,brake pads,etc.
|
|
|
|
36. ZT310-V rear disc brake caliper mounting plate
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Only the mounting plate, does not include calipers, brake pads, etc.
|
|
|
|
37. ZT310-V rear disc brake main pump assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Connect the front brake caliper to the control unit. It is recommended to buy 2 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" at the same time to prevent leakage of brake fluid.Please confirm that you have the ability to install it by yourself. If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,total dosage is 0.17L.
|
|
|
|
38. ZT310-V brake hose FMC-HU segment
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: ZT310-V owners with the production date is before June 4, 2021 can purchase this part for replacement. Please pay attention to the production date. Connect the front brake upper pump to the control unit. It is recommended to purchase two "1251513-013000 disc brake oil pipe copper washers φ15×φ10.2×1.5" at the same time to prevent brake fluid leakage. If you need to purchase this brake system accessory please contact your sales.
Only DOT 4 brake fluid can be added,total dosage is 0.17L.
|
|
|
|
39. ZT310-V brake hose FC-HU segment
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Connect the front brake caliper to the control unit. It is recommended to buy 2 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" at the same time to prevent leakage of brake fluid.Please confirm that you have the ability to install it by yourself. If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,total dosage is 0.17L.
|
|
|
|
40. ZT310-V brake hose RMC-HU segment
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Connect the rear brake main pump to the control unit. It is recommended to buy 2 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" at the same time to prevent leakage of brake fluid. If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,total dosage is 0.17L.
|
|
|
|
41. ZT310-V brake hose RC-HU segment
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 2021 models equipped with V right guard bar and 2019 V310 models need to purchase "1100100-796000 ZT310-V brake hose RC-HU section (after-sales Kit)" instead. It is recommended to purchase two "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" to prevent brake fluid leakage.If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,total dosage is 0.17L.
|
|
|
|
42. ZT310-V brake hose RC-HU section (after-sales kit)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Before purchasing the RC-HU section of the brake hose, please check whether the right guard bar of the whole vehicle has a support. If there is no bracket as shown in the figure, purchase this kit directly for replacement; If there is a bracket, you can directly purchase "1100100-729000 ZT310-V brake hose RC-HU section (II)" for replacement. It is recommended to purchase two "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" to prevent brake fluid leakage.If you need to purchase this brake system accessory please contact your sales. Only DOT 4 brake fluid can be added, with a total dosage of 0.170l.
|
|
|
|
43. ZT310-T front brake caliper assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: It is recommended to buy 2 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" at the same time to prevent leakage of brake fluid. Only DOT 4 brake fluid can be added. The old plug is removed with a flathead screwdriver, and the new one uses a 5# hexagon corner, and the old and new models are interchangeable.
|
|
|
|
44. ZT310-V rear disc brake caliper assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: It is recommended to buy 2 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5" at the same time to prevent leakage of brake fluid. Only DOT 4 brake fluid can be added. The old plug is removed with a flathead screwdriver, and the new one uses a 5# hexagon corner, and the old and new models are interchangeable.
|
|
|
|
45. ZT310 hydraulic control unit (wet type)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:The ZT-U/G1/Z2 recommended to buy 8 pieces of "1251513-013000 disc brake tubing copper washers φ15 × φ10.2 × 1.5 "at the same time to prevent leakage of brake fluid.If you need to purchase this brake system accessory please contact your sales.Only DOT 4 brake fluid can be added,ZT/KD-310R/X/Ttotal dosage is 0.18L,ZT/KD-310V/VX、250S-ABS/250-S (national three)/R is 0.17L，KD/ZT-U/G1/Z2 is 0.185L，ZT310/125T-M is 0.215L.
|
|
|
|
46. ZT250-R rear disc brake hydraulic brake switch
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:It is recommended to purchase 2 pieces of 1251513-013000 disc brake tubing copper washers φ15×φ10.2×1.5 at the same time to prevent leakage of brake fluid.Please confirm that you have the ability to install it by yourself, and you need to provide the original frame code and engine code before passing the order.
|
|
|
|
47. Fully synthetic brake oil DOT4 (1L bottle)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Note: Each bottle is 1 liter. It must be used in time after opening, and it is necessary to seal and prevent moisture during storage; it is recommended not to exceed one month. Inferior or damp brake oil can cause poor braking system and can cause brake failure if the impact is severe. Be sure to replace the brake fluid in a repair shop with brake fluid replacement equipment and technology to avoid air in the brake line.
|
|
|
|