1. ZT310-V bright yellow box
|
|
|
|
|
|
|
|
2. T02 built-in fuel pump (ZT310-V)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks：If you need to buy the fuel pump filter and sealing rubber ring, please purchase from the wearing parts of the modification parts of the corresponding model,or place an order by searching by Code.
|
|
|
|
3. GB5789M6×16 (environmental color)
|
|
|
|
|
|
|
|
4. ZT250-S thread cap of the fuel tank
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: With threaded liner. Be motorcycleeful not to pull the nylon cord hard to prevent it from breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
6. ZT310-V electric injection high-pressure tubing assembly
|
|
|
|
|
|
|
|
7. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
8. Flanged bushing φ6.2×φ8.4×3.5＋φ14×1.5(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
9. flanging bushing buffer rubber (φ8.5×φ14×1)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
10. GB70.1M8×55(environmental color)
|
|
|
|
|
|
|
|
11. ZT250-R fuel tank flat pad φ9×φ37.5×2 (environmental color)
|
|
|
|
|
|
|
|
12. Non-standard flat pad φ13×φ8.2×1.5 (environmental color)
|
|
|
|
|
|
|
|
13. ZT250-S tank pressure glue
|
|
|
|
|
|
|
|
14. ZT250-S fuel tank gasket
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: ZT250-S upgraded version of the old state square pad can be purchased with 2 pieces of this second generation fuel tank pad to instead them.
|
|
|
|
15. ZT250-R cushion fixing block
|
|
|
|
|
|
|
|
16. HJ125-6 pod glass strip (1.5m)(after-sale)
|
|
|
|
|
|
|
|
17. T02 oil level sensor (ZT310-V)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: It is necessary to confirm you have ability to replace it before placing an order of it, otherwise it is recommended to purchase a complete set of oil pump assembly.This sensor does not include the oil pump body, only the sensor assembly.Before purchase,make sure whether the pump base is as show in the picture,otherwise,it can not be purchased.
|
|
|
|