1. ZT310-R1 direction handlebar clamp (TFT instrument)
|
|
|
|
|
|
|
|
2. ZT250-S M8 bolt decorative buckle (titanium gold)
|
|
|
|
|
|
|
|
3. GB70.1 Hexagonal Socket M8×30 (color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
4
|
|
Remarks:From January 3,2023 , some vehicles the bolts whitch used to lock the direction handle pess piece , the upper and lower plate lock the front shock absorber are unified by GB70.1 M8×35 to GB70.1 M8×30 , and you can choose the corresponding number according to your needs.
|
|
|
|
4. ZT310-R direction pad assembly
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Contains 1251111-006000 ZT310-R studs. The direction of the block and the stud bolt are assembled together with a special double-head stud sleeve portion, and the thread fastening rubber is applied to strengthen the fastening function of the stud bolt, and it is difficult to remove and tighten the double head bolts after the subsequent replacement is required. It is recommended to replace the whole set. If only the studs are replaced, the assembly must be in place and sturdy. We will not be responsible for any damage caused by improper assembly.Due to the change of state,this section is suspended,you can buy"4094200-006000 ZT310－R direction pad M10×1.25（titanium/spray lacquer）after-sales assembly ”instead,it''s recommended to buy 2 pcs at the same time.
|
|
|
|
5. ZT310-R double head screw
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remark: If you need to replace the double studs separately, you can lock the two M10×1.5 nuts to each other as shown in the small figure and then use the sleeve to turn clockwise to remove the studs. When replacing a new stud, you must apply a threaded fastening to prevent loosening. It is necessary to ensure that the assembly is in place and firm, and we are not responsible for any damage caused by improper assembly.
|
|
|
|
6. ZT310-R gasket of upper connecting board
|
|
|
|
|
|
|
|
7. ZT310-R direction pad M10×1.25(titanium/spray lacquer)
|
|
|
|
|
|
|
|
8. ZT310-R bushing φ10×φ12×41
|
|
|
|
|
|
|
|
9. ZT310-R buffer rubber of upper connecting board
|
|
|
|
|
|
|
|
10. Non-standard nut M10×1.5(Dacromet)
|
|
|
|
|
|
|
|