1. ZONTES Engine oil (SN5W-40/1L)
|
|
|
|
|
|
|
|
2. ZT180MN refined filter seal component(carton packaging)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Included refiner,ZT180MN oil refiner seal and 55×2.5 O-ring.
|
|
|
|
3. ZT180MN Oil filter sealing ring
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: When changing the oil filter element, please pay attention to check whether the seal ring is damaged. Be motorcycleeful not to leak the seal ring.
|
|
|
|
4. 55×2.5 acrylate adhesive O shape circle
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: It is need to remove the fine filter cover and replace with a new O-ring to prevent leakage.
|
|
|
|
5. M12×1.5×15 ablassschraube (9.8 grade/environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remark: It is recommended to replace the combination seal 12×φ20×2 at the same time of replacing the oil. ZT310/350 &250-S/R series knight car the standard torque is 24±4N.m;KD/ZT125/150/155-U/U1/G1/Z2/GK is 25±3N.m;ZT125/310/350 series scooters 25N.m.
|
|
|
|
6. Combined sealing gasket 12×φ20×2
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: It is recommended to replace with the new parts after disassembly to prevent leakage.
|
|
|
|
7. Non-standard cover type 9 degree nut M6×13 (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks:This is a raised nut.If the stud needs to be replaced,the raised nut must be purchase at the same time.This nut can replace the old low nut.It is recommended to replace them at the same time in order to unify.KD/ZT125-155-U/G1/Z2 water-cooled series standard torque is 10N ± 1.5N.m，ZT310、ZT350、ZT250-S/R series：12N ± 1.5N.m，ZT310T-M：10N±1N.m.
|
|
|
|
8. Non-standard M6×25.5 double-head 9.8 studs bolts (environmental color Zinc)
|
|
|
|
|
|
|
Quantity
|
|
|
3
|
|
Remarks: ① and ② of the old model have been discontinued. If you need to replace the old double-headed studs, you must purchase them in pairs. "1251300-096000 Non-standard cover-shaped 9-grade nut M6×13 (environmentally protection color zinc)"; if it is ①, and it needs to chamfer 1.5~2 on the fine filter cover before assembly.This stud cannot be used in the engine cylinder head of the 200 model.
|
|
|
|