1. ZT250-R hwire harness assembly
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: The purchase of the wiring harness assembly now requires the purchase of 1184200-177000 ZT310 EFI ignition coil (with high voltage line/with damping line) + 1050953-004000 CR8EI-0.8 spark plug (with screw cap).
|
|
|
|
2. Pin tie (Black 4.8×130)
|
|
|
|
|
|
|
|
3. Grade 0 flame retardant tie (black 3.6×295)(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
8
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
4. ZT250-R headlamp diode
|
|
|
|
|
|
|
|
5. ZT310 Rectifier (230W)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Before purchasing the ZT310 series vehicles please check whether "ZT310 (230W)" is printed on the back of the rectifier.If not, you can purchase it. ZT250-S/S upgrade version the refictifier of vehicle has been discontinued and can be purchased as a replacement.
|
|
|
|
6. Stainless steel heat insulation mat 6×20×1.6(5 pcs/after-sale)
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Note: Since the parts are small and for the convenience of packaging and shipping, these parts are required to be sold in packs/bags/boxes of 5 pieces each, i.e., one material code already includes 5 such parts. The quantity assembled in the assembly only represents the actual usage of this part within the current assembly (not calculated as 5 times), so please be sure to pay attention to the quantity (assembly quantity × 5) when placing an order to avoid over-purchasing. For example, the assembly quantity of ZT250 - S expansion nails (5 pieces/set - after-sales) in the assembly is 2, and the quantity after adding to the shopping cart is 2; the actual quantity received will be 10 (5 × 2 = 10) pieces of ZT250 - S expansion nails, and so on.
|
|
|
|
7. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
8. ZT250-S Four-pin Normally Open Relay(after-sale)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10. ZT250-R dump switch sleeve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12. ZT250-S fuze wire (15A)
|
|
|
|
|
|
|
Quantity
|
|
|
8
|
|
Remarks: KST brand medium 15A fuse.
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Medium 25A.
|
|
|
|
|
|
|
|
|
|
|
|
Quantity
|
|
|
2
|
|
Remarks: Medium 10A.
|
|
|
|