1. ZT310-R rear auxiliary fender aluminum alloy bracket (home made)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: When assembling the ZT250/310-R model or KD150-U model auxiliary mud plate assembly, it must be noted that the bolt at the left chain adjustment must use the method of M8×30 bolt + elastic pad + gasket; It is forbidden to use M8×35 bolts or missing reload spring pads and gaskets, otherwise there is a risk of breaking the left chain adjustment or rear flat fork, and the parts caused by incorrect assembly methods will not be three guarantes.
|
|
|
|
2. GB93 φ8 (environmental color)
|
|
|
|
|
|
|
|
3. GB97.1φ8 (environmental color)
|
|
|
|
|
|
|
|
4. GB5789M8×35 (environmental color)
|
|
|
|
|
|
|
|
5. GB6177.1M8(color Zinc)
|
|
|
|
|
|
|
|
6. GB5789M8×30 (environmental color)
|
|
|
|
|
|
|
|
7. Front segment of ZT310-V rear auxiliary clay plate and iron bracket
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Rear joint mud plate iron bracket front and rear joints, threaded holes when installing screws need to add thread fastening glue.
|
|
|
|
8. ZT310-V rear auxiliary clay plate and iron bracket rear section
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: At the connection between the front section and the rear section of the rear auxiliary mudboard iron bracket, thread fastening glue should be added when installing the screws in the threaded holes. The material is Baosteel 436L stainless steel, and the surface is electrophoresed in black.
|
|
|
|
9. Non-standard bolt M6×12 (304 stainless steel)
|
|
|
|
|
|
|
|
10. GB5789M6×16 (environmental color)
|
|
|
|
|
|
|
|
11. Flanging bushing φ6.2×φ8.4×3.5＋φ14×1.5
|
|
|
|
|
|
|
|
12. Buffer rubber of flanging bushing (φ8.5×φ14×1)
|
|
|
|
|
|
|
|
13. Rear auxiliary fender retaining plate
|
|
|
|
|
|
|
|
14. Non-standard bolt M6×16 (304 stainless steel)
|
|
|
|
|
|
|
|
15. ZT310-V rear auxiliary mudguard
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks:Due to the structural optimization of the old model ① has been suspended ,If your vehicle produced before July 2021 need to replace this rear auxiliary mudguard,it' is necessary to purchase 2 pcs of"1250503-021093 GB97.1φ8(color zine)"at the same time.Due to the structural optimization, the old model② will be switched to the new model after the inventory is consumed, and should be reduced accordingly "Non-standard bolt M6×16 (304 stainless steel)", "GB93 φ 8 (environmental color) "and "Plywood M6×11×15(color zinc)" 2 pieces each.
|
|
|
|
16. Plywood M6×11×15(color Zinc)
|
|
|
|
|
|
|
|
17. ZT250-S rear reflector
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19. ZT250-S rear liceness rubber buffer
|
|
|
|
|
|
|
|
20. ZT310 rear turn signal (including license plate light)
|
|
|
|
|
|
|
|
21. GB96.1 φ6(environmental color)
|
|
|
|
|
|
|
|
22. ZT250-S muffler anti-hot plate sleeve
|
|
|
|
|
|
|
|
23. ZT310 Rear sub fender wire rubber plug
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: Added on March 11,2019.The previously produced vehicles without equipped with this rubber plug and can be purchased separately.The small picture shows the installation position of the rubber plug.
|
|
|
|
24. ZT310-R adapter cable of vice fender(L=2000)
|
|
|
|
|
|
|
|
25. ZT250-S Flameout switch wire fixing bracket
|
|
|
|
|
|
|
|
26. Grade 0 flame retardant tie (black 3.6×295)
|
|
|
|
|
|
|
|
27. HJ125-6 rear license light bracket
|
|
|
|
|
|
|
|
28. Rear advertising plate (ZONTES)
|
|
|
|
|
|
|
Quantity
|
|
|
1
|
|
Remarks: 2 pieces of non-standard bolts M6×12 (304 stainless steel) or Non standard internal plum blossom bolt M6×12 (304 stainless steel) and 2 pieces of GB6177.1M6 (environmental color) are required.
|
|
|
|
29. GB6177.1M6 (environmental color)
|
|
|
|
|
|
|
|