|
|
|
|
Quantity
|
|
2
|
Remarks: See the assembly video for the disassembly of the balance block.
|
|
|
2. ZT250-R left hand rubber sleeve
|
|
|
|
Quantity
|
|
1
|
Remarks: If you need to remove the left handle rubber sleeve from the handle bar, you can soak it in hot water for about 10 minutes, then use the dust blower to blow the air to the middle part between the left hand rubber and handlebar(as indicated by the left arrow) or by other tool.
|
|
|
3. ZT250-R left handle bar switch
|
|
|
|
|
4. ZT250-R Left Handlebar Switch (No ABS/New)
|
|
|
|
Quantity
|
|
1
|
Remarks:If the hand switch anti-rotation bolt is missing, can be purchased"1251100-219000 Cross ball screw M5×30".
|
|
|
5. ZT250-R left hand rocker arm assembly (after sale)
|
|
|
|
Quantity
|
|
1
|
Remarks: Match with 1134100-031000 ZT250-R left handle rocker (machine) or 1184100-102000 ZT250-R left handle rocker.This is the old rocker arm of ZT310-R / X and ZT250-R,it cannot be used with the new ZT310-V left handle rocker arm assembly,you can distinguish the status by clicking or downloading the picture to enlarge it and compare the appearance. Rocker arm assembly cancel the clutch sheath because the clutch sheath has been discontinued.
|
|
|
6. ZT250-R Left Handle Rocker Arm Holder (without switch/adjusting screw/rubber sleeve)
|
|
|
|
|
7. ZT250-R clutch cable sheath
|
|
|
|
|
8. Non-standard hexagon socket bolt M6×13-φ8×20 (environmental color)
|
|
|
|
|
9. GB/T6185 hexagonal nylon lock nut M6 (environmental color)
|
|
|
|
Quantity
|
|
1
|
Remarks: Standard torque:8~10N.m.
|
|
|
10. ZT250-R Clutch Arm Adjusting Screw
|
|
|
|
|
11. ZT250-R clutch rocker seat lock nut
|
|
|
|
|
12. ZT250-R Left handle rocker (Machine)
|
|
|
|
Quantity
|
|
1
|
Remarks: Match with 1134200-006000 ZT250-R left hand rocker arm assembly; rocker arm does not contain rocker seat assembly, it needs to be purchased separately. The rocker base shown is for comparison only, so be sure to distinguish it before you buy it. You can distinguish the status by clicking or downloading the picture and then comparing it with the shape of the rocker.Because the anodizing process is difficult to ensure that the consistent color for each batch, different products of different batches will have different color ,the colors does not affect normal use.When replacing the handle rocker arm ,be sure to remove rocker base nut first, and then remove the bolt.Standard torque:8~10N.m.
|
|
|
13. ZT250-R half cover of left handle bar
|
|
|
|
|
14. ZT250-R left hand rocker arm assembly (machine plus)
|
|
|
|
Quantity
|
|
1
|
Remarks: The ZT250-S model's old left-hand rocker arm (shown in the small picture) has been discontinued. You need to purchase this rocker arm assembly to instead it.
|
|
|
15. ZT250-S left rearview mirror
|
|
|
|
|
|
|
|
|
|
17. Non-standard bolt M6×25 (environmental color/10.9 grade)
|
|
|
|
|
18. ZT310-V clutch switch
|
|
|
|
|
19. GB818 cross recessed pan head screw M4×12(color Zinc)
|
|
|
|
|
20. ZT310 generation left handle switch horn button
|
|
|
|
Quantity
|
|
1
|
Remarks:Only suitable for the first generation left handle switch shown on the picture,please confirm before purchase.It can be distinguished by looking at the shape indicated by the arrow.
|
|
|
21. Cross ball screw M5×30
|
|
|
|
Quantity
|
|
1
|
Note: If the left or right hand switch anti-rotation bolt is missing,you can purchase this bolt replacement.
|
|
|